FEM analysis on multi-cell CFST bifurcated columns

QIAO Qiyun; LIANG Xu; CAO Wanlin; WU Haipeng; YIN Fei; LI Xiangyu

doi:10.11918/j.issn.0367-6234.201705141

Chinese

您当前的位置：

首页 >

文章列表页 >

FEM analysis on multi-cell CFST bifurcated columns

更新时间：2026-10-19

- FEM analysis on multi-cell CFST bifurcated columns
- Vol. 49, Issue 12, Pages: 2017-12(2017)
- 作者机构：
  
  城市与工程安全减灾教育部重点实验室(北京工业大学),北京,100124
- 作者简介：
- 基金信息：
- DOI：10.11918/j.issn.0367-6234.201705141
  CLC： TU398.9;TU317.1
- Published：2017
- 稿件说明：
移动端阅览
QIAO Qiyun, LIANG Xu, CAO Wanlin, et al. FEM analysis on multi-cell CFST bifurcated columns[J]. 2017, 49(12): 2017-12.
DOI：

QIAO Qiyun, LIANG Xu, CAO Wanlin, et al. FEM analysis on multi-cell CFST bifurcated columns[J]. 2017, 49(12): 2017-12. DOI： 10.11918/j.issn.0367-6234.201705141.

摘要

为研究异形截面多腔钢管混凝土分叉柱的力学性能及设计方法，以北京某超高层建筑异形截面多腔钢管混凝土巨型分叉柱为原型，在已进行的低周反复荷载试验基础上，对异形截面多腔钢管混凝土分叉柱抗震性能进行有限元分析，研究了不同构造措施、不同钢材及混凝土强度等级等参数对钢管混凝土分叉柱抗震性能的影响.结果表明：基于本文提出的有限元建模方法，所得有限元分析结果与试验结果吻合较好；适当增加腔体数，设置肋板、角钢和钢管能够有效提高异形截面钢管混凝土分叉柱抗震性能；在等用钢量下，增加腔体数量比增加钢板厚度能更有效地提高分叉柱抗震性能；不同材料强度对异形截面钢管混凝土分叉柱抗震性能有较大影响，在进行其抗震设计时，宜选用强度等级匹配的钢材与混凝土.

Abstract

To study the mechanical properties and design method of CFST columns with special-shaped cross-section

based on the special-shaped multi-cell CFST bifurcated columns of a super-high building under construction in Beijing

the FEM analysis on the seismic behavior of the special-shaped concrete-filled bifurcated steel tube columns was carried out. The test parameters were the different constructional measures

different steel and concrete grades. The results show that the developed FEM analysis method has adequate accuracy compared with the test results. The seismic behavior of the columns increased with increasing the number of the cells

the installation of the stiffener

L-type steel and steel tube. Increasing the number of the cavities has a better effect on seismic behavior than the increasing thickness of the steel tube in the case of the same steel consumption. The materials strength has a great influence on the seismic performance of the bifurcated column

and the strength matching between the steel and concrete should be considered in seismic design.

关键词

Keywords

references

Views

639

下载量

CSCD

Alert me when the article has been cited

提交

Tools

Publicity Resources

Seismic and thermal performance of precast concrete frame with precast facade panel

Seismic behavior of RC columns strengthened with near-surface mounted shape memory alloy bars

Seismic behavior of resilient SFCBECCconcrete bridge piers

Experimental research on theseismic behaviors of squat RC shear walls under offshore atmospheric environment

Seismic behavior of interior joints of high-strength concrete frame structure

Related Author

YANG Xuan

Lü Wanqing

ZHAO Zuozhou

XIAO Ming

QIAN Jiaru

HAN Wenlong

CHANG Zhaoqun

XING Guohua

Related Institution

Department of Civil Engineering, Tsinghua University

National Center of Technology Innovation for Green and Low-Carbon Building

China Institute of Building Standard Design & Research Co., Ltd.

School of Civil Engineering, Chang′an University, Xi′an

School of Civil and Environmental Engineering, Harbin Institute of Technology

AI问答

Postal code：100079
Tel：（010）53879206 Email：tmw@bjxintong.com.cn
Technical support is provided by Beijing Founder electronics co., LTD 京ICP备09082226号-64 京公网安备11010602201714号
It is recommended to read the content of this site in Chrome&IE9+. Please switch to extreme mode in browser 360.
Cookies We use cookies to help provide and enhance our service and tailor content. By continuing, you agree to the use of cookies.

⁰