Comprehensive analysis of derived indicators of deflection basin for back-calculation of rigid pavement parameters

YANG Wenchen; LI Xinkai; TIAN Bijiang; HU Chengyu; CHEN Liangliang

doi:10.11918/j.issn.0367-6234.201707120

Chinese

您当前的位置：

首页 >

文章列表页 >

Comprehensive analysis of derived indicators of deflection basin for back-calculation of rigid pavement parameters

更新时间：2026-10-23

- Comprehensive analysis of derived indicators of deflection basin for back-calculation of rigid pavement parameters
- Vol. 50, Issue 9, Pages: 47-54(2018)
- 作者机构：
  
  1. 陆地交通气象灾害防治技术国家工程实验室(云南省交通规划设计研究院),昆明,650041
  2. 哈尔滨工业大学交通科学与工程学院,哈尔滨,150090
- 作者简介：
- 基金信息：
- DOI：10.11918/j.issn.0367-6234.201707120
  CLC： U416.2
- Published：2018
- 稿件说明：
移动端阅览
YANG Wenchen, LI Xinkai, TIAN Bijiang, et al. Comprehensive analysis of derived indicators of deflection basin for back-calculation of rigid pavement parameters[J]. 2018, 50(9): 47-54.
DOI：

YANG Wenchen, LI Xinkai, TIAN Bijiang, et al. Comprehensive analysis of derived indicators of deflection basin for back-calculation of rigid pavement parameters[J]. 2018, 50(9): 47-54. DOI： 10.11918/j.issn.0367-6234.201707120.

摘要

为解决刚性路面结构参数反演方法的适用性问题，综合分析刚性路面结构参数反演中3类代表性的弯沉盆衍生指标法.在系统梳理弯沉盆面积指数法、惰性点法、弯沉盆重心距离法的模型体系的基础上，采用理论数值分析的方法，定量分析3类衍生指标的规律特性，并从工程适用的简单、易操作性出发，提出惰性点法的计算图表和弯沉盆面积指数法及重心距离法的回归公式.以典型的刚性道面结构形式为例，对比分析3类弯沉盆衍生指标法的参数反演结果的准确性和鲁棒性，检验所提出模型或图表的有效性.计算结果表明：提出的计算图表或公式大幅简化了参数反演中衍生指标的计算，3种衍生指标法的参数反演结果存在明显差异，弯沉盆重心距离法充分利用各测点的信息并以拟合误差最小化为原则，显著提高参数反演的精确性和鲁棒性.

Abstract

In order to improve the applicability of back-calculation methods of rigid pavement parameters

this research presents comprehensive analysis of three representative derived indicators of deflection basin for back-calculation of rigid pavement parameters. By systematic analysis and modelling of AREA

intertial point (IP) and Barycentric Horizontal Distance (BHD) method in the ILLI-BACK

the distribution laws of these three methods were investigated quantitatively using numerical analysis

and the nomograph of IP and regression formulas of AREA and BHD were developed respectively to improve the applicability in the practice. Taking typical rigid pavement structure as an example

the accuracy and robustness of three comparative back-calculation methods were verified. Results showed that the back-calculation were greatly simplified using the nomograph and regression formulas. The back-calculation results based on three comparative methods exhibited remarkable difference. BHD significantly improved the accuracy and robustness in back-calculation of rigid pavement parameters by making full use of measurement information at all the sensors and minimizing the fitting error.

关键词

Keywords

references

Views

184

下载量

CSCD

Alert me when the article has been cited

提交

Tools

Publicity Resources

A prediction method of subgrade modulus based on three parameters of FWD

Evaluation of rutting resistance differences of indoor samples and pavement cores

Viscoelastic-plastic damage model of porous asphalt mixtures

Meso-structure of crumb rubber asphalt mixture based on discrete element method

Rutting evolution mechanism of asphalt pavement based on the Jamming transition theory

Related Author

YAO Pengfei

WANG Long

XIAO Qian

ZHANG Dingyi

ZHANG Lei

XIAO Xin

ZHANG Xiaoning

FENG Decheng

Related Institution

Research Institute of Highway Ministry of Transport

Nanjing Modern Multimodal Transportation Laboratory

School of Transportation, Southeast University

School of Civil Engineering and Transportation, South China University of Technology

Department of Civil and Environmental Engineering, Washington State University

AI问答

Postal code：100079
Tel：（010）53879206 Email：tmw@bjxintong.com.cn
Technical support is provided by Beijing Founder electronics co., LTD 京ICP备09082226号-64 京公网安备11010602201714号
It is recommended to read the content of this site in Chrome&IE9+. Please switch to extreme mode in browser 360.
Cookies We use cookies to help provide and enhance our service and tailor content. By continuing, you agree to the use of cookies.

⁰