Dynamic characteristics of ball water entry cavity

DU Yanfeng; WANG Cong; LI Jiachuan; WANG Wei

doi:10.11918/j.issn.0367-6234.201709094

Chinese

您当前的位置：

首页 >

文章列表页 >

Dynamic characteristics of ball water entry cavity

更新时间：2026-10-23

- Dynamic characteristics of ball water entry cavity
- Vol. 50, Issue 10, Pages: 118-123(2018)
- 作者机构：
  
  哈尔滨工业大学航天学院,哈尔滨,150001
- 作者简介：
- 基金信息：
- DOI：10.11918/j.issn.0367-6234.201709094
  CLC： O351.2
- Published：2018
- 稿件说明：
移动端阅览
DU Yanfeng, WANG Cong, LI Jiachuan, et al. Dynamic characteristics of ball water entry cavity[J]. 2018, 50(10): 118-123.
DOI：

DU Yanfeng, WANG Cong, LI Jiachuan, et al. Dynamic characteristics of ball water entry cavity[J]. 2018, 50(10): 118-123. DOI： 10.11918/j.issn.0367-6234.201709094.

摘要

为研究球体低速入水的空泡特性以及空泡的形成对球体运动特性的影响，基于独立膨胀原理对充分发展后的空泡形态建立了理论模型，采用高速相机对不同速度的球体入水过程进行拍摄，观察球体入水从没有空泡到空泡充分发展的过程，分析了空泡的形成对球体后方射流的影响以及空泡对球体的运动特性的影响，研究了空泡的动态特性.结果表明，在球体入水没有形成空泡时，球体后方的射流以水柱的形式向上溅射；在形成稳定的空泡后，在空泡表面闭合前射流向四周溅射，空泡表面闭合后射流主要向上溅射.由于球体入水速度的变化、入水空泡的形成以及入水撞击时冲击力的影响，球体的加速度变化比较复杂，球体的阻力系数受到入水空泡的影响而明显减小.用建立的空泡形态理论模型得到了入水空泡截面积随时间的变化，并与实验结果进行了对比，对比结果显示了较好的一致性，分析表明不同深度处空泡从发展到破灭的时间大致相同，深度较小处的空泡截面积较大.

Abstract

To study the characteristics of low velocity ball water entry cavity and the effect of cavity on ball dynamic characteristics

a cavity was modeled based on the principle of independence of the cavity sections expansion. A high-speed video camera was used to observe the process of ball water entry at different velocities and the process of cavity formation. The effect of cavity formation on jet flow and dynamic characteristics of the ball as well as the cavity dynamic characteristics were analyzed. The results showed that the formed cavity had an great effect on the jet flow. The jet was sputtered in the form of a water column when the cavity was not formed. After the stable cavity was formed

the jet was sputtered around before the surface closure and sputtered upward after the surface closure. The ball acceleration changed complexly due to the changed of ball water entry velocity

the formation of cavity and the impact force. The drag coefficient decreased when the cavity was formed. The change of the cavity section area was obtained using the proposed cavity model

which was verified by the experiment results. The time of cavity formation at different depth has little difference and the cavity section has a larger maximum area at small depth.

关键词

Keywords

references

Views

175

下载量

CSCD

Alert me when the article has been cited

提交

Tools

Publicity Resources

Prediction of the state of revolution bodies entering water in parallel

Multiphase flow characteristics of supercavitating vehicle in the tuning motion

Active flow control of ship deck coupled flow field based on jet flow

MetaDAGAN-driven approach for multifunction radar and operating mode recognition

Fusion of CBAM with bidirectional recurrent gated residual network for image Copy-Move forgery detection

Related Author

WANG Cong

HE Chaojie

YU Delei

WANG Wei

WANG Cong

WEI Yingjie

ZHAO Jiachen

HAN Dong

Related Institution

（School of Astronautics, Harbin Institute of Technology,,）

National Key Laboratory of Rotorcraft Aeromechanics (Nanjing University of Aeronautics and Astronautics)

School of Aeronautics and Astronautics, Sun Yat-Sen University

AI问答

Postal code：100079
Tel：（010）53879206 Email：tmw@bjxintong.com.cn
Technical support is provided by Beijing Founder electronics co., LTD 京ICP备09082226号-64 京公网安备11010602201714号
It is recommended to read the content of this site in Chrome&IE9+. Please switch to extreme mode in browser 360.
Cookies We use cookies to help provide and enhance our service and tailor content. By continuing, you agree to the use of cookies.

⁰