Cooling characteristics of full coverage film holes with opposite lateral ejection angles

DING Yang; CHANG Hai-ping; DU Zhi-neng

doi:10.13224/j.cnki.jasp.2014.03.005

Chinese

您当前的位置：

首页 >

文章列表页 >

Cooling characteristics of full coverage film holes with opposite lateral ejection angles

更新时间：2026-07-07

- Cooling characteristics of full coverage film holes with opposite lateral ejection angles
- Vol. 29, Issue 3, Pages: 511-518(2014)
- 作者机构：
  
  1. 南京航空航天大学能源与动力学院,南京,210016
  2. 中国航空工业集团公司沈阳发动机设计研究所,沈阳,110015
- 作者简介：
- 基金信息：
- DOI：10.13224/j.cnki.jasp.2014.03.005
  CLC：
- Published：2014
- 稿件说明：
移动端阅览
丁阳, 常海萍, 杜治能. 具有相反横向射流角的全覆盖气膜孔冷却特性[J]. 航空动力学报, 2014, 29(3): 511-518.

doi: 10.13224/j.cnki.jasp.2014.03.005
丁阳, 常海萍, 杜治能. 具有相反横向射流角的全覆盖气膜孔冷却特性[J]. 航空动力学报, 2014, 29(3): 511-518. DOI： 10.13224/j.cnki.jasp.2014.03.005.

doi: 10.13224/j.cnki.jasp.2014.03.005 DOI：

摘要

通过数值计算的方法对全覆盖气膜冷却结构的流场特性、壁面表面传热系数、绝热壁面气膜冷却效率以及考虑固体导热影响下的综合冷却效率进行了对比研究.结果显示：相反横向射流角产生的反肾形涡对使冷气侧向扩散能力更强；虽然表面传热系数升高，但是由于较高的绝热壁面气膜冷却效率降低了传入固体壁面的热量，提升综合冷却效率.吹风比为1.0时，45°相反横向射流角斜孔有最高的综合冷却效率.当吹风比为1.5和2.0时，30°相反横向射流角斜孔有最高综合冷却效率.与相同横向射流角斜孔作对比，15°相反横向射流角斜孔综合冷却效率不及15°相同横向射流角斜孔，45°，60°相反横向射流角斜孔综合冷却效率在不同流向长度上与相同横向射流角斜孔综合冷却效率相差不大，30°相反横向射流角斜孔综合冷却效率高于相同横向射流角斜孔.

Abstract

Numerical investigations were performed to study the full coverage film cooling structure on the flow field characteristics

wall surface heat transfer coefficient

adiabatic wall film cooling effectiveness and integrated cooling effectiveness under consideration of heat conduction. Results indicates that kidney vortex pair generated in the flow field of film cooling with opposite lateral ejection angles makes the film spread wider laterally. Despite of raised heat transfer in this condition

the integrated cooling effectiveness increases as high adiabatic wall cooling effectiveness reduces the heat conduction. Under blowing ratio of 1.0

the slant hole with opposite lateral ejection angle of 45° has the highest integrated cooling effectiveness. The integrated cooling effectiveness of slant hole with opposite lateral ejection angle of 30° is the highest when blowing ratio of 1.5 and 2.0. Compared with corresponding slant hole with single lateral ejection angle

the film cooling with opposite lateral ejection angle of 15° has lower integrated cooling effectiveness. The cooling effectiveness of slant hole with opposite lateral ejection angles of 45° and 60° respectively are both comparable to the integrated cooling effectiveness of the corresponding structures with single lateral ejection angle. When compared with slant hole with single lateral ejection angle of 30°

the film cooling with opposite lateral ejection angle of 30° has higher integrated cooling effectiveness.

关键词

Keywords

references

Views

961

下载量

CSCD

Alert me when the article has been cited

提交

Tools

Publicity Resources

Use two-dimensional Bayesian method to solve inverse heat conduction problem for rotating disc cavity

Cooling and heat transfercharacteristics of high-pressure turbine blade with cutback squealer tip

Investigation on the performance of bionic wick flat heat pipes

Numerical investigation of a thermal barrier coated vane using conjugate heat transfer approach

基于自适应MOMEDA滚动轴承故障特征提取方法

Related Author

YANG Yang

CAO Nan

CHEN Hang

WANG Weijie

MA Haiteng

ZHANG Qiang

罗天培

刘瑞敏

Related Institution

中国航天科技集团有限公司航天推进技术研究院北京市航天动力试验技术与装备工程技术研究中心

中国航天科技集团有限公司航天推进技术研究院北京航天试验技术研究所

华北电力大学新能源电力系统国家重点实验室

华北电力大学能源动力与机械工程学院低品位能源多相流与传热北京市重点实验室

AI问答

Postal code：100079
Tel：（010）53879206 Email：tmw@bjxintong.com.cn
Technical support is provided by Beijing Founder electronics co., LTD 京ICP备09082226号-64 京公网安备11010602201714号
It is recommended to read the content of this site in Chrome&IE9+. Please switch to extreme mode in browser 360.
Cookies We use cookies to help provide and enhance our service and tailor content. By continuing, you agree to the use of cookies.

⁰