Structure optimization of a certain type of gas turbine sealing disk

LIU Ben-wu; WANG Jian-jun; SUI Xue-bing

doi:10.13224/j.cnki.jasp.2014.03.012

Chinese

您当前的位置：

首页 >

文章列表页 >

Structure optimization of a certain type of gas turbine sealing disk

更新时间：2026-07-07

- Structure optimization of a certain type of gas turbine sealing disk
- Vol. 29, Issue 3, Pages: 563-570(2014)
- 作者机构：
  
  1. 北京航空航天大学能源与动力工程学院,北京,100191
  2. 中国航空工业集团公司沈阳黎明航空发动机（集团）有限责任公司,沈阳,110043
- 作者简介：
- 基金信息：
- DOI：10.13224/j.cnki.jasp.2014.03.012
  CLC：
- Published：2014
- 稿件说明：
移动端阅览
刘本武, 王建军, 隋雪冰. 某型燃气轮机封严盘的结构优化[J]. 航空动力学报, 2014, 29(3): 563-570.

doi: 10.13224/j.cnki.jasp.2014.03.012
刘本武, 王建军, 隋雪冰. 某型燃气轮机封严盘的结构优化[J]. 航空动力学报, 2014, 29(3): 563-570. DOI： 10.13224/j.cnki.jasp.2014.03.012.

doi: 10.13224/j.cnki.jasp.2014.03.012 DOI：

摘要

为了分析研究某型燃气轮机封严盘均压孔裂纹故障，达到提高疲劳寿命的目的，进行了封严盘故障机理和局部结构修改分析.建立封严盘有限元分析模型，分析了封严盘振动应力分布特点和共振特性，结果表明：均压孔孔边应力水平高是疲劳裂纹的主要原因，针对该原因提出了改进方向.在装配状态下，针对原结构以及均压孔部位进行局部修改的几种情况进行了结构强度对比分析，最终提出了某型燃气轮机封严盘局部结构修改方案，修改后均压孔孔边的应力水平降低16%，屈服强度储备系数由0.891提高到1.069.

Abstract

To systematically study the crack failure of the pressure-balanced holes on sealing disk

and increase the fatigue life of a certain type of gas turbine

failure phenomenon and local structural modification of sealing disk were analyzed. Finite element analysis model was established and the vibration stress distribution features and resonance characteristics were analyzed.From the analysis

it showed that the high static stress on edges of the pressure-balanced holes was the main cause of the fatigue crack and improvement measures were put forward.Structure strength comparison analysis were done based on the original structure and several local modifications to the pressure-balanced holes under assembly conditions

and finally the local structure modification scheme for sealing disk of a certain type of gas turbine was put forward. And then the stress on edges of the pressure-balanced holes reduced by 16%

the yield strength reserve coefficient increased from 0.891 to 1.069.

关键词

Keywords

references

Views

918

下载量

CSCD

Alert me when the article has been cited

提交

Tools

Publicity Resources

Structure optimization method of three⁃blade propeller for stratospheric airship

Mechanical analysis and damage characteristics of self⁃lubricating joint bearings of helicopter variable⁃pitch tie rod ends

Thermal coupling analysis of variable cross-section circular hole grain under temperature impact

Prediction of composite fan blade high cycle fatigue weak-link point location

Accelerated parametric model order reduction method

Related Author

Lingling SHANG

Haifeng WANG

Qihui KOU

Kunpeng LIU

Changchun ZHOU

Yongsheng YANG

Deqiang TAN

Xiaoqiang YANG

Related Institution

School of Aeronautics，Northwestern Polytechnical University

Aviation Engineering College，Civil Aviation Flight University of China，Guanghan Sichuan

College of Aerospace,Beijing Institute of Technology

Xi’an Modern Chemistry Research Institute,China North Industries Group Corporation Limited

南京航空航天大学能源与动力学院

AI问答

Postal code：100079
Tel：（010）53879206 Email：tmw@bjxintong.com.cn
Technical support is provided by Beijing Founder electronics co., LTD 京ICP备09082226号-64 京公网安备11010602201714号
It is recommended to read the content of this site in Chrome&IE9+. Please switch to extreme mode in browser 360.
Cookies We use cookies to help provide and enhance our service and tailor content. By continuing, you agree to the use of cookies.

⁰