An experimental scheme of investigating fatigue life of turbine casing slot

LIU Chun-feng; ZHANG Yun-hua; ZHANG Xiao-yong; YAN Xiao-jun; NIE Jing-xu

doi:10.13224/j.cnki.jasp.2014.11.027

Chinese

您当前的位置：

首页 >

文章列表页 >

An experimental scheme of investigating fatigue life of turbine casing slot

更新时间：2026-07-07

- An experimental scheme of investigating fatigue life of turbine casing slot
- Vol. 29, Issue 11, Pages: 2735-2742(2014)
- 作者机构：
  
  1. 北京航空航天大学能源与动力工程学院,北京,100191
  2. 中国航天科技集团公司中国航天空气动力技术研究院,北京,100074
  3. 中国航空工业集团公司南方航空工业(集团)有限公司,湖南,株洲,412002
  4. 北京航空航天大学能源与动力工程学院航空发动机气动热力国家级重点实验室,北京,100191
- 作者简介：
- 基金信息：
- DOI：10.13224/j.cnki.jasp.2014.11.027
  CLC：
- Published：2014
- 稿件说明：
移动端阅览
刘春风, 张允华, 张小勇, 闫晓军, 聂景旭. 一种涡轮机匣挂钩槽疲劳寿命研究的试验方案[J]. 航空动力学报, 2014, 29(11): 2735-2742.

doi: 10.13224/j.cnki.jasp.2014.11.027
刘春风, 张允华, 张小勇, 闫晓军, 聂景旭. 一种涡轮机匣挂钩槽疲劳寿命研究的试验方案[J]. 航空动力学报, 2014, 29(11): 2735-2742. DOI： 10.13224/j.cnki.jasp.2014.11.027.

doi: 10.13224/j.cnki.jasp.2014.11.027 DOI：

摘要

提出了一种针对涡轮机匣挂钩槽疲劳寿命的试验方案.该方案首先对涡轮机匣进行数值分析

得到危险部位的应力分布

再通过常温下机械加载来模拟危险部位总应力场

并在该载荷下获取涡轮机匣挂钩槽疲劳寿命.利用该方案

对新制作的涡轮机匣结构改进措施、原有涡轮机匣维修措施以及腐蚀影响进行了试验研究.结果表明:①新制作的涡轮机匣挂钩槽增加倒圆半径为0.8mm的圆角后

安全寿命在50%

95%置信度下可分别增加69%和198%;②原有涡轮机匣挂钩槽铣倒圆半径为1.5mm的内圆角后可以获得与新制作的涡轮机匣挂钩槽相近的疲劳寿命;③腐蚀会严重影响涡轮机匣挂钩槽的疲劳寿命.

Abstract

An experimental scheme of studying the fatigue life of the turbine casing slot was presented. With the scheme

the stress field of the critical section was obtained by numerical analysis

and mechanical loading was applied to simulate the total stress field of the critical section at room temperature. Under the load

the fatigue life of the turbine casing slot can be obtained. Using the proposed scheme

structural improvement measure of new turbine casing

modification measure of old turbine casing and the effect of corrosion were evaluated experimently. The results show that: (1) rounding the new turbine casing slot corner with a 0.8mm-radius can increase the safe life by 69% and 198% with confidence of 50% and 95%

respectively; (2) a fatigue life similar to the new turbine casing slot can be obtained through cutting a 1.5mm-radius corner on the old turbine casing slot; (3) corrosion can affect the fatigue life of the turbine casing slot significantly.

关键词

Keywords

references

Views

833

下载量

CSCD

Alert me when the article has been cited

提交

Tools

Publicity Resources

Numerical calculation and experimental test of heat radiation⁃ convection coupling heat transfer characteristics of turbine casing

Effect of foreign object damage on fatigue strength of stainless steel

Investigation on disk containment of aero-engine turbine casing

Effect of low cycle fatigue loading on the crack tip plastic zone of high cycle fatigue crack

组合式弹性金属密封泄漏特性实验研究与结构优化

Related Author

Jiawei LI

Hang SHI

Tong WANG

Fangzhou SONG

Tianyi WANG

Xianglei LIU

Hao CHEN

杨上峰

Related Institution

College of Energy and Power Engineering，Nanjing University of Aeronautics and Astronautics

Shenyang Engine Research Institute，Aero Engine Corporation of China

南京航空航天大学能源与动力学院

中国航空发动机集团有限公司四川燃气涡轮研究院

Jiangsu Province Key Laboratory of Aerospace Power System, College of Energy and Power Engineering, Nanjing University of Aeronautics and Astronautics

AI问答

Postal code：100079
Tel：（010）53879206 Email：tmw@bjxintong.com.cn
Technical support is provided by Beijing Founder electronics co., LTD 京ICP备09082226号-64 京公网安备11010602201714号
It is recommended to read the content of this site in Chrome&IE9+. Please switch to extreme mode in browser 360.
Cookies We use cookies to help provide and enhance our service and tailor content. By continuing, you agree to the use of cookies.

⁰