Experiments were conducted on a triple swirler combustor at fixed atmospheric pressure. Firstly the triple swirler combustor model and experimental system were designed
and then experiments were conducted to study the effect of inlet airflow velocity
inlet temperature and fuel-air ratio on the combustion performance
including flow drag performance
ignition performance
lean blowout performance and combustion efficiency performance. Results show that: the triple swirler combustor can be ignited successfully and operated stably at all experimental cases
and inlet airflow velocity has little effect on the ignition performance; the total pressure loss coefficient increases with inlet airflow velocity increasing while the flow drag coefficient decreases non-linearly with the increasing of inlet airflow velocity
and the inlet airflow has not been at the full development state; as inlet airflow temperature increases
the ignition performance and lean blowout performance become better and the combustion efficiency improves.
Experiment of combustion performance of a triple swirler combustor with no dilution holes
Experiment of combustion characteristic of triple swirler combustor
Experiment on effect of dome and dilution holes on outlet temperature distribution for triple swirler combustor
Experiment on lean blowout performance of triple axial swirler combustor
Influence of oxygen addition in multi-swirl pilot zone on atmospheric pressure ignition characteristics
Related Author
HONG Liang
徐丽
刘凯
XUE Chong
AN Bo-kun
WANG Bo-sen
ZHANG Chi
LIN Yu-zhen
Related Institution
沈阳理工大学 机械工程学院
沈阳航空航天大学 航空航天工程学院(部)
Harbin Dongan Engine (Group) Corporation Limited
National Key Laboratory of Science and Technology on Aero-Engine Aero-Thermodynamics,School of Energy and Power Engineering,Beijing University of Aeronautics and Astronautics
Sichuan Gas Turbine Establishment,Aero Engine Corporation of China