Dynamic characteristics under various excitations for a helicopter transmission system

LIN He; WANG San-min; DONG Jin-cheng

doi:10.13224/j.cnki.jasp.2015.01.029

Chinese

您当前的位置：

首页 >

文章列表页 >

Dynamic characteristics under various excitations for a helicopter transmission system

更新时间：2026-07-07

- Dynamic characteristics under various excitations for a helicopter transmission system
- Vol. 30, Issue 1, Pages: 219-227(2015)
- 作者机构：
  
  西北工业大学机电学院,西安,710072
- 作者简介：
- 基金信息：
- DOI：10.13224/j.cnki.jasp.2015.01.029
  CLC：
- Published：2015
- 稿件说明：
移动端阅览
林何, 王三民, 董金城. 多激励下某直升机传动系统动载特性[J]. 航空动力学报, 2015, 30(1): 219-227.

doi: 10.13224/j.cnki.jasp.2015.01.029
林何, 王三民, 董金城. 多激励下某直升机传动系统动载特性[J]. 航空动力学报, 2015, 30(1): 219-227. DOI： 10.13224/j.cnki.jasp.2015.01.029.

doi: 10.13224/j.cnki.jasp.2015.01.029 DOI：

摘要

针对由弧齿锥齿轮和行星轮系构成的直升机传动系统

构建了纯扭振动模型

采用集中参数法建立了齿侧间隙非线性动力学方程.通过有限元方法求得了时变啮合刚度

采用4-5阶变步长Runge-Kutta法对动力学方程进行了数值求解

借助动载系数、相图、Poincaré截面图、快速傅里叶变换频谱图等分析手段

研究了传动系统在时变啮合刚度、齿侧间隙、综合传动误差、外载荷等多种激励作用下系统的动载特性.结果表明啮合刚度对传动系统的影响最大

动载系数最大值为1.5;齿侧间隙对系统响应特性的影响是有限的;啮合误差在一定程度上抑制了齿轮系统的振动;外载荷波动对不同速级的影响不同

动载系数最大值发生在并车传动.

Abstract

For a helicopter transmission system which consists of spiral bevel gears and planetary gear train

the purely torsional vibration model was established

and the non-linear dynamical equations containing backlash was built using the lumped-parameter method. Through the finite element method

the time-varying mesh stiffness was obtained

and the dynamical equations were solved by the 4-5 order Runge-Kutta algorithm with variable time step; by means of dynamic load coefficient

phase plane plots

Poincaré maps and fast Fourier transform spectra

the dynamic characteristics of transmission system were studied under various excitations of the time-varying mesh stiffness

backlash

general transmission errors and external load. The results show that mesh stiffness has the greatest effect on the transmission system

with the maximum dynamic load coefficient of 1.5; backlash has a limited effect on the response characteristics; to some extent

mesh errors can suppress the vibration of the gear system; external load fluctuation has various effects on different speed stages

and the maximum dynamic load coefficient is stemmed from the combined drive gears.

关键词

Keywords

references

Views

897

下载量

CSCD

Alert me when the article has been cited

提交

Tools

Publicity Resources

Analysis of load sharing mechanism and parameter matching of,gear split torque drive system

Two-dimensional domain structure of dynamical parameters of combining spiral gear transmission

Bifurcation characteristic and modeling of transverse-torsional spur gear vibration considering friction and multiple clearances

Chaotic prediction of metal rubber damper for occurred chaos

Aerothermoelastic coupling dynamic model of panel flutter with time delay of heat transfer

Related Author

ZHU Rupeng

XU Xintao

JIN Guanghu

董金城

王三民

林何

BAO He-yun

LU Feng-xia

Related Institution

西北工业大学机电学院

College of Mechanical and Electrical Engineering, Nanjing University of Aeronautics and Astronautics

Hunan Provincial Key Laboratory of Health Maintenance for Mechanical Equipment, Hunan University of Science and Technology

School of Mathematics and Computing Science, Hunan University of Science and Technology

Department of Mechanical and Electrical Engineering, Baicheng Normal College

AI问答

Postal code：100079
Tel：（010）53879206 Email：tmw@bjxintong.com.cn
Technical support is provided by Beijing Founder electronics co., LTD 京ICP备09082226号-64 京公网安备11010602201714号
It is recommended to read the content of this site in Chrome&IE9+. Please switch to extreme mode in browser 360.
Cookies We use cookies to help provide and enhance our service and tailor content. By continuing, you agree to the use of cookies.

⁰