Experimental and mechanism analysis of casing treatment with different axial angles

KUANG Hai-yang; CHU Wu-li; ZHANG Hao-guang

doi:10.13224/j.cnki.jasp.2015.08.013

Chinese

您当前的位置：

首页 >

文章列表页 >

Experimental and mechanism analysis of casing treatment with different axial angles

更新时间：2026-07-07

- Experimental and mechanism analysis of casing treatment with different axial angles
- Vol. 30, Issue 8, Pages: 1900-1908(2015)
- 作者机构：
  
  1. 西北工业大学动力与能源学院,西安,710129
  2. 先进航空发动机协同创新中心,北京,100191
- 作者简介：
- 基金信息：
- DOI：10.13224/j.cnki.jasp.2015.08.013
  CLC：
- Published：2015
- 稿件说明：
移动端阅览
旷海洋, 楚武利, 张皓光. 不同轴向偏转角处理机匣实验与机理分析[J]. 航空动力学报, 2015, 30(8): 1900-1908.

doi: 10.13224/j.cnki.jasp.2015.08.013
旷海洋, 楚武利, 张皓光. 不同轴向偏转角处理机匣实验与机理分析[J]. 航空动力学报, 2015, 30(8): 1900-1908. DOI： 10.13224/j.cnki.jasp.2015.08.013.

doi: 10.13224/j.cnki.jasp.2015.08.013 DOI：

摘要

为了探索不同轴向偏转角处理机匣对压气机稳定裕度的影响

以一个亚声压气机为平台通过实验与数值仿真方法探索了8130r/min设计转速下3种与轴向成不同角度的处理机匣对该压气机稳定性的作用.详细的分析了各流量工况下不同处理机匣叶顶的流动结构、叶顶载荷分布、处理机匣缝(或槽)内的流动、周向平均后叶顶的损失分布和缝内喷射气流的轴向动量.研究发现:随着缝(或槽)与轴向所成夹角的增大

整个流量范围内

处理机匣的扩稳能力先增强后减弱;大流量工况下

转子叶顶载荷增加

转子的等熵效率降低.

Abstract

Experimental and numerical simulations were performed on a subsonic compressor to investigate the stabilizing mechanisms of casing treatment with different axial angles at rotation speed of 8130r/min.Flow structures and static pressure distribution of rotor tip

flow structure in the slots(or grooves)

loss distribution in rotor tip

axial momentum of the injected flow at different mass flows were studied.Results confirmed that the capability of the casing treatment of extending the compressor stall margin first increased and then decreased within the whole mass flow range

the loading of rotor tip increased and the isentropic efficiency decreased under large mass flow with the increasing axial angle of the casing treatment.

关键词

Keywords

references

Views

689

下载量

CSCD

Alert me when the article has been cited

提交

Tools

Publicity Resources

Mechanism of affect on stall margin of circumferential grooves with variable pre-swirl angle

Load reducing mechanism under fan blade out event

Impact of Reynolds number on unsteady flow in axial flow compressor rotor

Effect of movable flat baffles plenum volume on pressure distortion flow field of engine

Analysis of flow field characteristics of medium reducer with splash lubrication in a certain helicopter

Related Author

冯云阳

袁巍

虞磊

耿景艳

曹冲

万召

李百洋

王卫国

Related Institution

先进航空发动机协同创新中心

北京航空航天大学能源与动力工程学院航空发动机气动热力国家级重点实验室

中国航空发动机集团有限公司商用航空发动机有限责任公司

中国航空发动机集团有限公司四川燃气涡轮研究院高空模拟技术重点实验室

南京航空航天大学能源与动力学院

AI问答

Postal code：100079
Tel：（010）53879206 Email：tmw@bjxintong.com.cn
Technical support is provided by Beijing Founder electronics co., LTD 京ICP备09082226号-64 京公网安备11010602201714号
It is recommended to read the content of this site in Chrome&IE9+. Please switch to extreme mode in browser 360.
Cookies We use cookies to help provide and enhance our service and tailor content. By continuing, you agree to the use of cookies.

⁰