Large eddy simulations of the transition process in a supersonic flat-plate boundary layer at free-stream Mach number of 4.5 and Reynolds number of 10000 were carried out using high precision weighted essentially non-oscillation (WENO) schemes. The inviscid flux was discretized by fifth-order
seventh-order
ninth-order WENO schemes separately and the viscous flux was discretized by fourth-order center difference scheme. The temporal discretization was made by means of third-order Runge-Kutta with total variation diminishing(TVD). By imposing a pair of the most unstable oblique first-mode disturbances on the inflow boundary
the transition progress of the flow from laminar
transition process to full turbulence was compared using three WENO schemes. Results indicate that the fifth-order WENO scheme is more dissipative than the seventh-order and ninth-order schemes
so it's difficult to capture eddy and pulse in the flow field. The dissipation of ninth-order WENO scheme is small
enabling to capture smaller eddy and high frequency. To study a problem with high frequency fluctuation or capture fine eddy
it's advisable to use the scheme higher than seventh-order.
Large eddy simulation of supersonic jet mixing flow
Large eddy simulation of cryogenic jet under supercritical pressure based on OpenFOAM
Analysis of n⁃dodecane spray jet by proper orthogonal decomposition
Large eddy simulation on the staggered tube bundle of the compact precooler
Study on opposed mixing flow in circumferential intake
Related Author
朱志斌
程晓丽
潘宏禄
Yuhang LI
Baoyuan WU
Yi WANG
Lixin ZHOU
Wenjin QIN
Related Institution
中国航天科技集团有限公司 中国航天空气动力技术研究院
National Key Laboratory of Science and Technology on Liquid Rocket Engines,Xi'an Aerospace Propulsion Institute,China Aerospace Science and Technology Corporation
Academy of Aerospace Propulsion Technology,China Aerospace Science and Technology Corporation
Beijing Aerospace Institute for Metrology and Measurement Technology, China Academy of Launch Vehicle Technology, China Aerospace Science and Technology Corporation
School of Mechanical Engineering, University of Shanghai for Science and Technology