General weight functions for corner quarter-elliptical crack in three-dimensional rectangular plate

JIA Xu; HU Xu-teng; SONG Ying-dong

doi:10.13224/j.cnki.jasp.2015.10.009

Chinese

您当前的位置：

首页 >

文章列表页 >

General weight functions for corner quarter-elliptical crack in three-dimensional rectangular plate

更新时间：2026-07-07

- General weight functions for corner quarter-elliptical crack in three-dimensional rectangular plate
- Vol. 30, Issue 10, Pages: 2357-2367(2015)
- 作者机构：
  
  1. 南京航空航天大学能源与动力学院江苏省航空动力系统重点实验室,南京,210016
  2. 南京航空航天大学机械结构力学及控制国家重点实验室,南京,210016
- 作者简介：
- 基金信息：
- DOI：10.13224/j.cnki.jasp.2015.10.009
  CLC：
- Published：2015
- 稿件说明：
移动端阅览
贾旭, 胡绪腾, 宋迎东. 三维矩形板1/4椭圆角裂纹的通用权函数[J]. 航空动力学报, 2015, 30(10): 2357-2367.

doi: 10.13224/j.cnki.jasp.2015.10.009
贾旭, 胡绪腾, 宋迎东. 三维矩形板1/4椭圆角裂纹的通用权函数[J]. 航空动力学报, 2015, 30(10): 2357-2367. DOI： 10.13224/j.cnki.jasp.2015.10.009.

doi: 10.13224/j.cnki.jasp.2015.10.009 DOI：

摘要

对三维矩形板1/4椭圆角裂纹的通用权函数进行了研究.基于有限元方法计算了裂纹面承受沿宽度方向的均布、线性分布和2次分布应力时的参考应力强度因子解

建立了形式较为统一、较高精度以及适用范围相对更宽的参考应力强度因子近似表达式.在此基础上获得了三维矩形板1/4椭圆角裂纹的通用权函数

最后采用裂纹面分别承受3次、5次和7次幂函数分布应力下的应力强度因子有限元解对通用权函数的计算精度进行了检验和验证.结果表明:建立的通用权函数相比已有的通用权函数精度由4%(A点)和6%(B点)提高到1.06%(A点)和1.6%(B点)

补充验证的7次幂函数分布载荷下的应力强度因子通用权函数解的精度达到3.67%(A点)7.45%(B点).

Abstract

General weight functions of the corner quarter-elliptical crack in three-dimensional rectangular plate were studied. Uniform

higher-precision and relatively wider-application-range approximate expressions of reference stress intensity factors were obtained

by using the reference finite element data of the stress intensity factor when the crack surface was subjected to in-plane uniform

linear and secondary power law distribution loading along the plate width. On this basis

the general weight functions of the corner quarter-elliptical crack in three-dimensional rectangular plate were obtained

the accuracy of the general weight functions was validated by finite element method finally when the crack surface was subjected to in-plane 3

7 times power law distribution loading. The results show that the accuracy of established general weight functions is raised from 4%(point A) and 6%(point B) to 1.06%(point A) and 1.6%(point B) compared with the existing general weight functions. The accuracy of complementary validation of stress intensity factors calculated by general weight function method under seven times power law distribution loading reaches 3.67%(point A) and 7.45%(point B).

关键词

Keywords

references

Views

942

下载量

CSCD

Alert me when the article has been cited

提交

Tools

Publicity Resources

Numerical calculation and experiment on leakage characteristics of floating ring seal

Locating the crack tip algorithm based on displacement field

Parameter optimization method of rotor dynamic vibration absorber

Calculation method of stress intensity factors of eccentric through cracks subjected to complex loading

基于自适应MOMEDA滚动轴承故障特征提取方法

Related Author

WANG Xiaoyan

ZHOU Kun

HU Tingxun

魏玉龙

董登科

李三元

张文东

许琦

Related Institution

中国航空工业集团有限公司飞机强度研究所

沈阳工业大学机械工程学院

东北大学机械工程与自动化学院

南京航空航天大学机械结构力学及控制国家重点实验室

南京航空航天大学能源与动力学院江苏省航空动力系统重点实验室

AI问答

Postal code：100079
Tel：（010）53879206 Email：tmw@bjxintong.com.cn
Technical support is provided by Beijing Founder electronics co., LTD 京ICP备09082226号-64 京公网安备11010602201714号
It is recommended to read the content of this site in Chrome&IE9+. Please switch to extreme mode in browser 360.
Cookies We use cookies to help provide and enhance our service and tailor content. By continuing, you agree to the use of cookies.

⁰