Numerical study on the effect of parallel injection on film-cooling effectiveness at turbine blade tip

JIANG Wei; XIE Dan-mei

doi:10.13224/j.cnki.jasp.2016.04.006

Chinese

您当前的位置：

首页 >

文章列表页 >

Numerical study on the effect of parallel injection on film-cooling effectiveness at turbine blade tip

更新时间：2026-07-07

- Numerical study on the effect of parallel injection on film-cooling effectiveness at turbine blade tip
- Vol. 31, Issue 4, Pages: 807-815(2016)
- 作者机构：
  
  武汉大学动力与机械学院,武汉,430072
- 作者简介：
- 基金信息：
- DOI：10.13224/j.cnki.jasp.2016.04.006
  CLC：
- Published：2016
- 稿件说明：
移动端阅览
姜伟, 谢诞梅. 水平喷流对叶顶气膜冷却效率影响的数值研究[J]. 航空动力学报, 2016, 31(4): 807-815.

doi: 10.13224/j.cnki.jasp.2016.04.006
姜伟, 谢诞梅. 水平喷流对叶顶气膜冷却效率影响的数值研究[J]. 航空动力学报, 2016, 31(4): 807-815. DOI： 10.13224/j.cnki.jasp.2016.04.006.

doi: 10.13224/j.cnki.jasp.2016.04.006 DOI：

摘要

为进一步提高燃气轮机叶顶区域的气膜冷却效率

在叶顶模型结构上对4种叶顶冷却结构的流动和传热进行了数值模拟

结果显示带有盖板的水平喷流结构能够有效地提高叶顶区域的气膜冷却效率

对于圆孔

可以将气膜冷却效率提高至原来的2倍以上.通过流场的分析发现:水平喷流结构可以调整冷却工质的流动

使得冷却工质的贴壁性更好、分布更加均匀

进而提高气膜冷却效率.此外还研究了间隙宽度、盖板尾缘厚度、盖度和整流栅对水平喷流结构气膜冷却效率的影响.结果表明:增加盖度和减小间隙宽度可以提高气膜冷却效率

但是盖度和间隙宽度的选取受到了强度、工艺和冷却工质入口压力等因素的限制.水平盖板结构的冷却效果比倾斜盖板结构的好.整流栅足够长时可以调整流动、提高气膜冷却效率.

Abstract

For the purpose of improving the film-cooling effectiveness on blade tip region of gas turbine

numerical simulation was carried out on the blade tip model to investigate the flow and heat transfer for four kinds of cooling holes. It was found that the covered structure can double the film-cooling effectiveness compared to the uncovered structure for aclinic injection structure.The physics was revealed by analysis of the flow filed

and results showed that the aclinic injection can improve flow distribution

obtain better film-coverage and more uniform flow distribution

consequently increasing the film-cooling effectiveness.The effect of gap width

cover degree

cover thickness and fence on film-cooling effectiveness was studied

and the results showed that the increase of the cover degree and decrease of the gap width can get a higher film-cooling effectiveness

but the cover degree and gap width were restricted by structural strength

technological level and secondary flow inlet pressure.Aclinic cover can obtain a better film-cooling effectiveness than the inclined one and there is a best cover thickness enabling to obtain the highest film-cooling effectiveness for the aclinic one.Sufficiently long fence can improve the flow distribution and increase the film-cooling effectiveness.

关键词

Keywords

references

Views

573

下载量

CSCD

Alert me when the article has been cited

提交

Tools

Publicity Resources

Method of blade vibration response analysis under airflow excitation

Effect of inaccurate source term loading on simulation ,precision for source term model

Optimal sampling strategy for aero-engine blade inspection with coordinate measuring machine

Design method for the under platform damper of rotor blade

Effects of spanwise distance and density ratio on the characteristic of double-jet film-cooling

Related Author

TIAN Shaojie

QI Wenkai

XU Zhenghua

ZHU Jianqin

LI Lin

QIU Lu

张现东

卜昆

Related Institution

College of Energy and Power Engineering,Nanjing University of Aeronautics and Astronautics

西北工业大学机电学院现代设计与集成制造技术教育部重点实验室

厦门大学航空航天学院

北京航空航天大学能源与动力工程学院

北京航空航天大学能源与动力工程学院航空发动机结构强度北京市重点实验室

AI问答

Postal code：100079
Tel：（010）53879206 Email：tmw@bjxintong.com.cn
Technical support is provided by Beijing Founder electronics co., LTD 京ICP备09082226号-64 京公网安备11010602201714号
It is recommended to read the content of this site in Chrome&IE9+. Please switch to extreme mode in browser 360.
Cookies We use cookies to help provide and enhance our service and tailor content. By continuing, you agree to the use of cookies.

⁰