Influence of combustor shape on self-ignition in solid fuel scramjet

CHI Hong-wei; WEI Zhi-jun; LI Biao; WANG Li-he; WANG Ning-fei

doi:10.13224/j.cnki.jasp.2016.08.025

Chinese

您当前的位置：

首页 >

文章列表页 >

Influence of combustor shape on self-ignition in solid fuel scramjet

更新时间：2026-07-07

- Influence of combustor shape on self-ignition in solid fuel scramjet
- Vol. 31, Issue 8, Pages: 1985-1994(2016)
- 作者机构：
  
  北京理工大学宇航学院,北京,100081
- 作者简介：
- 基金信息：
- DOI：10.13224/j.cnki.jasp.2016.08.025
  CLC：
- Published：2016
- 稿件说明：
移动端阅览
迟鸿伟, 魏志军, 李彪, 王利和, 王宁飞. 燃烧室构型对固体燃料超燃冲压发动机自点火的影响[J]. 航空动力学报, 2016, 31(8): 1985-1994.

doi: 10.13224/j.cnki.jasp.2016.08.025
迟鸿伟, 魏志军, 李彪, 王利和, 王宁飞. 燃烧室构型对固体燃料超燃冲压发动机自点火的影响[J]. 航空动力学报, 2016, 31(8): 1985-1994. DOI： 10.13224/j.cnki.jasp.2016.08.025.

doi: 10.13224/j.cnki.jasp.2016.08.025 DOI：

摘要

数值研究了PMMA（聚甲基丙烯酸甲酯）在带凹腔的固体燃料超燃冲压发动机燃烧室中的瞬态自点火机理以及燃烧室构型对自点火的影响.基于求解非定常二维轴对称RANS（Reynolds-averaged Navier-Stokes）方程建立数值模型，湍流模型采用SST（shear stress transport） k-ω模型，燃烧模型采用有限速率/涡耗散模型.结果表明：反应物在凹腔提供停留时间内，产生的化学反应热能够持续积累并提高，使得反应气体达到点火温度时，燃烧室能够实现自点火.凹腔长度、凹腔直径、收敛角和平直段直径是燃烧室构型中影响自点火的主要因素.并提出了一种阶梯式凹腔构型，用于增强自点火性能.

Abstract

The transient self-ignition mechanism of PMMA (polymethylmethacrylate) and the effect of combustor shape on self-ignition in solid fuel scramjet with cavity were simulated numerically. An unsteady two-dimensional axisymmetric RANS (Reynolds-averaged Navier-Stokes) equation

SST(shear stress transport) k-ω turbulent model

finite-rate/eddy dissipation reaction model were solved numerically. Main conclusions are as follows: the reactants reach the ignition temperature when the heat of reaction accumulates and increases continuously within the residual time provided by the cavity

so the self-ignition is permitted in solid fuel scramjet. The cavity length

cavity diameter

convergence angle and the cylindrical section diameter of the combustor are the main influential factors to the self-ignition. A step type cavity is suggested to enhance the self-ignition performance.

关键词

Keywords

references

Views

594

下载量

CSCD

Alert me when the article has been cited

提交

Tools

Publicity Resources

Review of research on solid fuel scramjet engine

Combustion characteristics of scramjet combustor

Effects of injection fin on flow and mixing characteristics of cavity flame holder

Numerical study on mixing enhancement for supersonic mixing layer in dual combustor ramjet

Comparative analysis of computational methods of supersonic combustor flowfield

Related Author

LV Zhong

XIA Zhi-xun

LIU Bing

LIU Yuan-chun

LI Jun-hong

PAN Hong-lu

SHEN Qing

CHENG Xiao-li

Related Institution

Science and Technology on Scramjet Laboratory, National University of Defense Technology

College of Aerospace Science and Engineering, National University of Defense Technology

China Academy of Aerospace Aerodynamics, China Aerospace Science and Technology Corporation

School of Jet Propulsion, Beijing University of Aeronautics and Astronautics

College of Aerospace and Materials Engineering, National University of Defense Technology

AI问答

Postal code：100079
Tel：（010）53879206 Email：tmw@bjxintong.com.cn
Technical support is provided by Beijing Founder electronics co., LTD 京ICP备09082226号-64 京公网安备11010602201714号
It is recommended to read the content of this site in Chrome&IE9+. Please switch to extreme mode in browser 360.
Cookies We use cookies to help provide and enhance our service and tailor content. By continuing, you agree to the use of cookies.

⁰