In order to obtain characteristics of single droplet deformation and breakage in a continuous and uniform air jet flow
the highspeed cameras were applied to measure the single droplet deformation and breakage. In the experimental conditions
experimental results show that: (1) The process of droplet deformation and breakage in the core/bag breakup regime is caused by the combination effects of liquidflow and external aerodynamics. It can be divided into umbrella-type breakup regime and dipper-type breakup regime. (2) The reduction of original diameters of droplet and the increase of airflow temperature could decrease the minimum requirements of aerodynamic force on the core/bag breakup. (3) The characteristic time of droplet breakup has a negative relationship with the aerodynamics
while its value and change gradient are both positively associated with the original droplet diameter. (4) The percentage of sub droplet quality raises with the increase of aerodynamics
but decreases with the increase of droplet original diameter.(5) The spatial dispersion of quality percentage of sub droplet increases with the rise of aerodynamics.
Experiment on impact of initial diameter on breakup characteristic of single droplet
Recent advances on jet atomization in cryogenic liquid rocket combustion chamber
Evaluation of different breakup models and application to the mixture preparation process for diesel engines
Numerical simulation of effect of turbulence flow in nozzle on flame lift-off length
Atomization characteristics of cross-flow injector in the fluidic nozzle throat
Related Author
WANG Suo-fang
FENG Zhi-peng
ZHU Dong-qing
LIU Yong
JIN Ren-han
Songling BAO
Yunxing YU
Xinxin GAO
Related Institution
Jiangsu Province Key Laboratory of Aerospace Power System, College of Energy and Power Engineering, Nanjing University of Aeronautics and Astronautics
School of Energy and Power Engineering,Huazhong University of Science and Technology
哈尔滨工程大学 动力与能源工程学院
北京理工大学 宇航学院
National Key Laboratory of Science and Technology on Aero-Engine Aero-thermodynamics, School of Energy and Power Engineering, Beijing University of Aeronautics and Astronautics