Impingement heat transfer inside wedge-shaped concave by jets from impingment plate with front-extended port

关涛; 张靖周; 单勇; 李云单; 陆海鹰

doi:10.13224/j.cnki.jasp.2017.03.010

Chinese

您当前的位置：

首页 >

文章列表页 >

Impingement heat transfer inside wedge-shaped concave by jets from impingment plate with front-extended port

更新时间：2026-07-07

- Impingement heat transfer inside wedge-shaped concave by jets from impingment plate with front-extended port
- Vol. 32, Issue 3, Pages: 592-598(2017)
- 作者机构：
  
  1. 南京航空航天大学能源与动力学院江苏省航空动力系统重点实验室,南京,210016
  2. 先进航空发动机协同创新中心,北京,100191
  3. 中国航空发动机集团有限公司沈阳发动机研究所,沈阳,110015
- 作者简介：
- 基金信息：
- DOI：10.13224/j.cnki.jasp.2017.03.010
  CLC：
- Published：2017
- 稿件说明：
移动端阅览
关涛, 张靖周, 单勇, 李云单, 陆海鹰. 楔形凹腔内带前伸槽冲击板射流冲击换热[J]. 航空动力学报, 2017, 32(3): 592-598.

doi: 10.13224/j.cnki.jasp.2017.03.010
关涛, 张靖周, 单勇, 李云单, 陆海鹰. 楔形凹腔内带前伸槽冲击板射流冲击换热[J]. 航空动力学报, 2017, 32(3): 592-598. DOI： 10.13224/j.cnki.jasp.2017.03.010.

doi: 10.13224/j.cnki.jasp.2017.03.010 DOI：

摘要

针对楔形凹腔内带前伸槽冲击板结构开展了传热特性的试验研究，分析了冲击板前伸槽伸出长度比（5~11）、前伸槽宽度比（2.5~8）和射流雷诺数（7900~31700）等参数对凹腔表面温度、展向平均努塞尔数和面积平均努塞尔数以及射流压力损失的影响.研究结果表明:相对于基准冲击板，带前伸槽的冲击板能够使得凹腔的射流冲击对流换热较基准冲击板有较大幅度的改善，但引起较大的射流压力损失；前伸槽伸出长度的增大使得凹腔表面射流冲击对流换热有较显著的增强，对射流压力损失的影响很小；增大冲击板前伸槽宽度可以使得凹腔表面对流换热得到一定程度的强化，但也会造成压力损失的增大.

Abstract

Experimental analysis was conducted to investigate the heat transfer inside a wedge-shaped concave by a row of jets from impingment plate with front-extended port. The effect of front-extended port extension spacing ratio (5~11)

front-extended port width spacing ratio (2.5~8) and jet Reynolds number （7900~31700）on the concave surface temperature distribution

spanwised-averaged Nusselt numbers，area-averaged Nusselt numbers and jet pressure loss were experimentally tested. The results indicated that the convective heat transfer of impinging plate with front-extended port was obviously enhanced compared with baseline plate

the front-extended port caused high jet pressure loss. The convective heat transfer of concave surface was significantly improved with the increase of front-extended port extension spacing ratio

yielding little effect on jet pressure loss. Convective heat transfer of concave surface was enhanced with increase of front-extended port width spacing ratio

however

the total pressure loss increased also.

关键词

Keywords

references

Views

593

下载量

CSCD

Alert me when the article has been cited

提交

Tools

Publicity Resources

Experimental and numerical study on pulsed-jet impingement heat transfer with an additional collection chamber

Numerical investigation of convective heat transfer on a wedge-shaped concave surface subjected to staggered offset impinging jets

Numerical analysis of hot launch of missile from a launch canister

Thermodynamic parameters calculating method of gas and its application in convective heat transfer over turbine cascade

Investigation on heat transfer of solid fuel surface and regression rate of solid fuel ramjet effect by swirl flow

Related Author

吕元伟

谭晓茗

张靖周

唐婵

SHAN Yong

ZHANG Jing-zhou

GUAN Tao

Yifei SU

Related Institution

南京工程学院能源与动力工程学院

Collaborative Innovation Center for Advanced Aero-Engine

Jiangsu Province Key Laboratory of Aerospace Power System, College of Energy and Power Engineering, Nanjing University of Aeronautics and Astronautics

School of Mechanical Engineering，Nanjing University of Science and Technology

南京理工大学机械工程学院

AI问答

Postal code：100079
Tel：（010）53879206 Email：tmw@bjxintong.com.cn
Technical support is provided by Beijing Founder electronics co., LTD 京ICP备09082226号-64 京公网安备11010602201714号
It is recommended to read the content of this site in Chrome&IE9+. Please switch to extreme mode in browser 360.
Cookies We use cookies to help provide and enhance our service and tailor content. By continuing, you agree to the use of cookies.

⁰