Dynamic uncertainty of the measuring instrument for ball bearings' contact angles

秦荦晟; 沈雪瑾; 郭梦媛; 曹崇崇

doi:10.13224/j.cnki.jasp.2017.08.028

Chinese

您当前的位置：

首页 >

文章列表页 >

Dynamic uncertainty of the measuring instrument for ball bearings' contact angles

更新时间：2026-07-07

- Dynamic uncertainty of the measuring instrument for ball bearings' contact angles
- Vol. 32, Issue 8, Pages: 2025-2031(2017)
- 作者机构：
  
  1. 上海大学机电工程与自动化学院机械自动化工程系,上海,200072
  2. 上海集优机械股份有限公司上海天安轴承有限公司,上海,200233
- 作者简介：
- 基金信息：
- DOI：10.13224/j.cnki.jasp.2017.08.028
  CLC：
- Published：2017
- 稿件说明：
移动端阅览
秦荦晟, 沈雪瑾, 郭梦媛, 曹崇崇. 球轴承接触角测量仪的动态不确定度[J]. 航空动力学报, 2017, 32(8): 2025-2031.

doi: 10.13224/j.cnki.jasp.2017.08.028
秦荦晟, 沈雪瑾, 郭梦媛, 曹崇崇. 球轴承接触角测量仪的动态不确定度[J]. 航空动力学报, 2017, 32(8): 2025-2031. DOI： 10.13224/j.cnki.jasp.2017.08.028.

doi: 10.13224/j.cnki.jasp.2017.08.028 DOI：

摘要

考虑球轴承接触角测量仪的自身动态特性、轴承外圈的试验转速、试验加载力对测量仪测量精度的影响，建立了测量仪的动态不确定度计算模型。针对小样本试验测试结果，采用灰色理论的方法评价了球轴承接触角测量结果的不确定度。基于不确定度的分离原理，分离出测量仪的自身动态特性、外圈转速、试验加载力对测量不确定度的影响规律，建立了接触角测量的动态不确定度计算模型，并通过实际算例验证了模型。建立的测量仪动态不确定度计算模型可用于预测不同工况下的接触角测量不确定度，有助于及时对测量仪进行相应的校准，以提高接触角测量结果的精度。

Abstract

The influences on the precision of the measuring instrument for ball bearings contact angle caused by the dynamic characteristic of the instrument

test speed and test load were taken into consideration

then the calculation model of the instruments dynamic uncertainty was established. Based on the measuring results of the small sample

the grey theory was applied to calculate the uncertainty of the measurement. The principle of the influence on the uncertainty of the measurement caused by the instrument's dynamic characteristic

test speed and test load was separated based on the uncertainty separation principle

and then the calculation model of the instruments dynamic uncertainty was established. After that

the calculation model was verified by the actual examples. The calculation model of the instruments dynamic uncertainty established could be used to predict the uncertainty of the measurement for contact angle under different conditions. With this help

the corresponding calibration could be done on the measuring instrument in time to raise the precision of the measurement for ball bearings contact angle.

关键词

Keywords

references

Views

505

下载量

CSCD

Alert me when the article has been cited

提交

Tools

Publicity Resources

Failure mechanism and improvement of ball bearing in aliquid rocket engine turbopump

Damage mechanics-finite element method for contact fatigue life prediction of ball bearings

Dynamic modeling for double-impulse behavior of ball bearing in the presence of a spall on inner race

Dynamics analysis on ball bearing-mechanism with clearance and impact of cage

考虑多源不确定性的复合材料风扇叶片高周疲劳失效概率评估

Related Author

Daqing HAO

Yanwei ZHENG

Zhijun CHEN

Xiaobo WEI

Hongliang LI

ZHENG Yanwei

ZHANG Song

DENG Sier

Related Institution

Luoyang Bearing Research Institute Corporation Limited，China National Machinery Industry Corporation

昆明理工大学机电工程学院云南省高校振动与噪声重点实验室

Faculty of Mechanical and Electrical Engineering, Kunming University of Science and Technology

AI问答

Postal code：100079
Tel：（010）53879206 Email：tmw@bjxintong.com.cn
Technical support is provided by Beijing Founder electronics co., LTD 京ICP备09082226号-64 京公网安备11010602201714号
It is recommended to read the content of this site in Chrome&IE9+. Please switch to extreme mode in browser 360.
Cookies We use cookies to help provide and enhance our service and tailor content. By continuing, you agree to the use of cookies.

⁰