Experiment of flow characteristics of coverplate 45° preswirl system

孙占东; 罗翔; 黄由之; 周志翔; 廖乃兵

doi:10.13224/j.cnki.jasp.2017.09.011

Chinese

您当前的位置：

首页 >

文章列表页 >

Experiment of flow characteristics of coverplate 45° preswirl system

更新时间：2026-07-07

- Experiment of flow characteristics of coverplate 45° preswirl system
- Vol. 32, Issue 9, Pages: 2125-2131(2017)
- 作者机构：
  
  1. 北京航空航天大学能源与动力工程学院,北京,100191
  2. 北京航空航天大学能源与动力工程学院航空发动机气动热力国家级重点实验室,北京,100191
  3. 中国航空发动机集团有限公司湖南动力机械研究所,湖南,株洲,412002
- 作者简介：
- 基金信息：
- DOI：10.13224/j.cnki.jasp.2017.09.011
  CLC：
- Published：2017
- 稿件说明：
移动端阅览
孙占东, 罗翔, 黄由之, 周志翔, 廖乃兵. 带盖盘45°预旋系统流动特性的实验[J]. 航空动力学报, 2017, 32(9): 2125-2131.

doi: 10.13224/j.cnki.jasp.2017.09.011
孙占东, 罗翔, 黄由之, 周志翔, 廖乃兵. 带盖盘45°预旋系统流动特性的实验[J]. 航空动力学报, 2017, 32(9): 2125-2131. DOI： 10.13224/j.cnki.jasp.2017.09.011.

doi: 10.13224/j.cnki.jasp.2017.09.011 DOI：

摘要

对带盖盘45°预旋系统的预旋腔和转静腔内流动特性进行了实验研究，得到了高转速下静盘表面的静压分布、中心面（z/S=0.326）总压分布、流阻系数以及预旋孔排气系数的变化规律。结果表明：流量分配对腔内压力分布影响较小；湍流参数是腔内流动特性的主要影响参数之一；腔内流动结构主要分为转静腔的自由涡结构以及预旋腔的回流区和低压区；流阻系数随湍流参数变大而显著上升；预旋孔排气系数随着进、出口压比增加而增加。

Abstract

Flow characteristics of preswirl cavity and rotorstator cavity of a coverplate 45° preswirl system structure were studied experimentally. Static pressure distribution on the stator

total pressure distribution on the mid plane (z/S=0326) and variations of the flow resistance coefficient in cavity and prenozzle discharge coefficient were obtained under high rotation speed. The results show that the pressure distribution in cavity is affected by the flow distribution weakly. The turbulent flow parameter is one of the primary control parameters of flow characteristics. The flow structure in cavity is mainly divided into two parts

the free vortex structures of rotorstator cavity

and the recirculation and low pressure zones in preswirl cavity. The flow resistance coefficient of the cavity rise significantly with the increase of the turbulent flow parameter. The discharge coefficient of preswirl nozzle increases with the increasing pressure ratio of preswirl nozzle.

关键词

Keywords

references

Views

452

下载量

CSCD

Alert me when the article has been cited

提交

Tools

Publicity Resources

Experiments of flow resistance characteristic in turbine casing

Experiment of flow characteristics of direct transfer pre-swirl system

Flow and heat transfer characteristics of drop-shaped micro pin-fin heat sinks with cross flow

Analysis on improvement of film cooling effectiveness with small coolant jets

Numerical simulation of flow and heat transfer inside co-rotating disc cavity with de-swirled radial inflow

Related Author

ZHANG Shu-hua

ZHU Hui-ren

ZHANG Li

LI Ye

ZHAO Xi

LUO Xiang

XU Guo-qiang

CAI Xu

Related Institution

School of Power and Energy,Northwestern Polytechnical University

Shenyang Engine Design and Research Institute, Aviation Industry Corperation of China

National Key Laboratory of Science and Technology on Aero-Engine Aero-thermodynamics,School of Jet Propulsion, Beijing University of Aeronautics and Astronautics

Key Laboratory of Enhanced Heat Transfer and Energy Conservation, Ministry of Education, College of Environmental and Energy Engineering, Beijing University of Technology

Electric Power Research Institute of Xinjiang, Xinjiang Electric Power Company

AI问答

Postal code：100079
Tel：（010）53879206 Email：tmw@bjxintong.com.cn
Technical support is provided by Beijing Founder electronics co., LTD 京ICP备09082226号-64 京公网安备11010602201714号
It is recommended to read the content of this site in Chrome&IE9+. Please switch to extreme mode in browser 360.
Cookies We use cookies to help provide and enhance our service and tailor content. By continuing, you agree to the use of cookies.

⁰