Thermal analysis for fast start up of noncontinuous rotor considering thermal contact resistance

徐宁; 王庆超; 王震林; 刘占生

doi:10.13224/j.cnki.jasp.2017.12.011

Chinese

您当前的位置：

首页 >

文章列表页 >

Thermal analysis for fast start up of noncontinuous rotor considering thermal contact resistance

更新时间：2026-07-07

- Thermal analysis for fast start up of noncontinuous rotor considering thermal contact resistance
- Vol. 32, Issue 12, Pages: 2896-2902(2017)
- 作者机构：
  
  1. 哈尔滨工业大学能源科学与工程学院,哈尔滨,150001
  2. 中国船舶重工集团公司哈尔滨船舶锅炉涡轮机研究所,哈尔滨,150078
- 作者简介：
- 基金信息：
- DOI：10.13224/j.cnki.jasp.2017.12.011
  CLC：
- Published：2017
- 稿件说明：
移动端阅览
徐宁, 王庆超, 王震林, 刘占生. 考虑接触热阻的非连续转子快速启动热分析[J]. 航空动力学报, 2017, 32(12): 2896-2902.

doi: 10.13224/j.cnki.jasp.2017.12.011
徐宁, 王庆超, 王震林, 刘占生. 考虑接触热阻的非连续转子快速启动热分析[J]. 航空动力学报, 2017, 32(12): 2896-2902. DOI： 10.13224/j.cnki.jasp.2017.12.011.

doi: 10.13224/j.cnki.jasp.2017.12.011 DOI：

摘要

针对燃气轮机转子非连续性的结构特点，通过考虑粗糙表面的接触热阻，建立了螺栓联接结构的热结构耦合分析模型。研究了快速启动过程中轮毂间接触面上的温度分布及最大应力的变化规律，并分析了表面粗糙度和预紧力等接触参数对接触面间的温度分布、拉紧力及最大应力的影响。结果表明：热冲击下粗糙表面间的接触热阻对接触面的温度分布及最大应力影响明显，接触参数对螺栓联结结构的温度场、应力场及热变形特性影响较大。研究成果可为燃气轮机转子设计、热致振动分析及故障诊断提供理论依据。

Abstract

The thermalstructure coupling analysis for bolted connection was modeled according to the structural features of noncontinuous rotor

taking thermal contact resistance of rough surface into account. The timevarying relationship of temperature distribution and maximum stress during the fast startup of the turbine was investigated. The influence of contact properties

such as roughness and pretightened force

on temperature distribution

tensioning force and maximum stress was analyzed. Results indicated that

the thermal contact resistance had great influence on temperature distribution of contact surface and maximum stress of bolted connection under the thermal impact

the contact property had influence on temperature distribution

deformation distribution and maximum stress. The research provides theoretical basis for the design of gas turbine

contributing to the analysis of thermally induced vibration and fault diagnosis.

关键词

Keywords

references

Views

537

下载量

CSCD

Alert me when the article has been cited

提交

Tools

Publicity Resources

Thermal conductivity prediction of unidirectional composites based on microstructure identification

考虑多源不确定性的复合材料风扇叶片高周疲劳失效概率评估

组合式弹性金属密封泄漏特性实验研究与结构优化

基于自适应MOMEDA滚动轴承故障特征提取方法

基于三维接触摩擦单元的套齿连接解析建模研究

Related Author

JIANG Hua

MAO Jun-kui

TU Ze-can

SHEN Kai

SONG Jin-rong

GUO Wen

HUANG Wei-na

Related Institution

Jiangsu Province Key Laboratory of Aerospace Power System, College of Energy and Power Engineering, Nanjing University of Aeronautics and Astronautics

Shanghai Aircraft Design and Research Institute, Commerical Aircraft Corporation of China Limited

Collaborative Innovation Center for Advanced Aero-Engine

College of Materials Science and Technology, Nanjing University of Aeronautics and Astronautics

China Gas Turbine Establishment, Aero Engine(Group) Corporation of China

AI问答

Postal code：100079
Tel：（010）53879206 Email：tmw@bjxintong.com.cn
Technical support is provided by Beijing Founder electronics co., LTD 京ICP备09082226号-64 京公网安备11010602201714号
It is recommended to read the content of this site in Chrome&IE9+. Please switch to extreme mode in browser 360.
Cookies We use cookies to help provide and enhance our service and tailor content. By continuing, you agree to the use of cookies.

⁰