Experiment on sealing characteristics of bolted flanged connections for aero-engines

艾延廷; 来纯强; 郝燕平; 孙丹; 吴立夫

doi:10.13224/j.cnki.jasp.2018.10.002

Chinese

您当前的位置：

首页 >

文章列表页 >

Experiment on sealing characteristics of bolted flanged connections for aero-engines

更新时间：2026-07-07

- Experiment on sealing characteristics of bolted flanged connections for aero-engines
- Vol. 33, Issue 10, Pages: 2315-2323(2018)
- 作者机构：
  
  1. 沈阳航空航天大学航空航天工程学部（院）辽宁省航空推进系统先进测试技术重点实验室,沈阳,110136
  2. 中国航空发动机集团有限公司沈阳发动机设计所,沈阳,110015
- 作者简介：
- 基金信息：
- DOI：10.13224/j.cnki.jasp.2018.10.002
  CLC：
- Published：2018
- 稿件说明：
移动端阅览
艾延廷, 来纯强, 郝燕平, 孙丹, 吴立夫. 航空发动机安装边螺栓连接密封特性试验[J]. 航空动力学报, 2018, 33(10): 2315-2323.

doi: 10.13224/j.cnki.jasp.2018.10.002
艾延廷, 来纯强, 郝燕平, 孙丹, 吴立夫. 航空发动机安装边螺栓连接密封特性试验[J]. 航空动力学报, 2018, 33(10): 2315-2323. DOI： 10.13224/j.cnki.jasp.2018.10.002.

doi: 10.13224/j.cnki.jasp.2018.10.002 DOI：

摘要

通过试验的方法对影响安装边螺栓连接结构密封特性的因素进行了系统分析与研究，设计和搭建了安装边螺栓连接密封特性试验系统，研究了螺栓加载方案、预紧力和螺栓数量对安装边密封特性的影响规律。研究表明：JIS B 2251加载方案可以获得更均匀的预紧力，与其他方案相比，气体泄漏持续的时间长，达到600s，且加载工作量小；增大预紧力可使压力下降的持续时间增加，从6.0kN的400s至7.5kN的540s和9.0kN的650s；螺栓数量的增加使得t=0时刻的泄漏率从2.6cm3/s降到1.7cm3/s，从而提升试验件的密封性能。该研究可为安装边密封特性分析与结构设计提供参考。

Abstract

The leakage factors of the bolted flanged connections were analyzed systematically and studied experimentally. The experimental system of sealing characteristics of bolted flanged connections was designed and constructed to study the influences of bolt loading method

preload and number of bolts on the sealing characteristics of flange connection. The results show that the loading method of JIS B 2251 can obtain more uniform preload

the gas leakage lasts longer than other methods up to 600s

and the workload is smaller; increasing the preload can increase the duration of the pressure drop

from 400s of 6.0kN to 540s of 7.5kN and 650s of 9.0kN. The increase in the number of bolts makes the leakage rate of the t=0 moment drop from 2.6cm3/s to 1.7cm3/s

thereby improving the sealing performance of the experimental piece. This study can provide a reference for the sealing characteristic analysis and structural design of bolted flanged connections.

关键词

Keywords

references

Views

728

下载量

CSCD

Alert me when the article has been cited

提交

Tools

Publicity Resources

Sealing characteristics of aviation pipeline fittings and influence of fluid temperature

"Hot modes" of rotor vibrations and vibration reduction design for aero-engines

Investigation on stiffness of circumferential distributed tie-rod rotor with curvic couplings of trochal disk

Experimental study on the relationship between bearing preload and system natural frequency

基于三维接触摩擦单元的套齿连接解析建模研究

Related Author

GAO Peixin

ZHUANG Baoshun

YAN Yangyang

LIAO Ming-fu

SONG Ming-bo

GAO Xiong-bing

HE Yun

WANG Juan

Related Institution

School of Mechanical Engineering,Dalian University of Technology

School of Electromechanical and Automotive Engineering, Yantai University

School of Power and Energy,Northwestern Polytechnical University

Shenyang Engine Design and Research Institute, Aviation Industry Corporation of China

China Gas Turbine Establishment, Aviation Industry Corporation of China

AI问答

Postal code：100079
Tel：（010）53879206 Email：tmw@bjxintong.com.cn
Technical support is provided by Beijing Founder electronics co., LTD 京ICP备09082226号-64 京公网安备11010602201714号
It is recommended to read the content of this site in Chrome&IE9+. Please switch to extreme mode in browser 360.
Cookies We use cookies to help provide and enhance our service and tailor content. By continuing, you agree to the use of cookies.

⁰