Parameter optimization method of rotor dynamic vibration absorber

刘子良; 许琦; 李文龙; 姚红良; 闻邦椿

doi:10.13224/j.cnki.jasp.2018.10.007

Chinese

您当前的位置：

首页 >

文章列表页 >

Parameter optimization method of rotor dynamic vibration absorber

更新时间：2026-07-07

- Parameter optimization method of rotor dynamic vibration absorber
- Vol. 33, Issue 10, Pages: 2359-2366(2018)
- 作者机构：
  
  1. 东北大学机械工程与自动化学院,沈阳,110819
  2. 沈阳工业大学机械工程学院,沈阳,110870
- 作者简介：
- 基金信息：
- DOI：10.13224/j.cnki.jasp.2018.10.007
  CLC：
- Published：2018
- 稿件说明：
移动端阅览
刘子良, 许琦, 李文龙, 姚红良, 闻邦椿. 一种转子动力吸振器的参数优化方法[J]. 航空动力学报, 2018, 33(10): 2359-2366.

doi: 10.13224/j.cnki.jasp.2018.10.007
刘子良, 许琦, 李文龙, 姚红良, 闻邦椿. 一种转子动力吸振器的参数优化方法[J]. 航空动力学报, 2018, 33(10): 2359-2366. DOI： 10.13224/j.cnki.jasp.2018.10.007.

doi: 10.13224/j.cnki.jasp.2018.10.007 DOI：

摘要

对用于抑制转子系统启机过临界转速时过大振动的动力吸振器进行参数优化设计

以达到最优抑振目的。利用有限元方法建立动力吸振器-转子耦合系统的动力学方程

求得耦合系统的半数值半解析的响应表达式。设计优化策略利用响应解与限边界的坐标轮换法相结合

寻找动力吸振器的最佳设计变量；将所得最优参数的动力吸振器与常规优化设计方法设计的动力吸振器的抑振性能进行对比

并分析动力吸振器对参数最优偏离的敏感性。结果表明：该参数优化方法优化的动力吸振器能降低1阶共振幅值达45.4%

说明了该方法的有效性；该方法比两种有效的常规优化方法优化的动力吸振器的抑振效果分别高11.2%、9%

可见其优化效果的优异性；与阻尼最优偏离相比

该参数优化方法优化的动力吸振器的抑振性能对刚度最优偏离具有更高的敏感性。

Abstract

The parameters of the dynamic vibration absorber used to suppress the excessive vibration of the rotor system were designed to optimize the vibration suppression. The dynamic equation of the dynamic vibration absorber-rotor coupling system was established by using the finite element method

and the response expression of the half-numerical half-resolution of the coupled system was obtained. The design optimization strategy was used to find the best design variable of the dynamic vibration absorber by combining the coordinate solution of the response solution and the bounded boundary. The sensitivity of the dynamic vibration absorber to the optimal deviation of different parameters was analyzed by comparing with the existing optimal design method of dynamic vibration absorber. The results show that the optimized the dynamic vibration absorber can reduce the amplitude of first order resonance by 45.4%

which shows the effectiveness of the method; this method is 11.2% and 9% higher than that of two effective conventional optimization methods

which can optimize the optimization effect of the dynamic vibration absorber; compared with the damped optimal deviation

the vibration suppression performance of the dynamic optimized vibration absorber has a higher sensitivity the optimal deviation of stiffness.

关键词

Keywords

references

Views

649

下载量

CSCD

Alert me when the article has been cited

提交

Tools

Publicity Resources

Transient vibration suppression of blisk based on optimizing intentional mistuning

Numerical calculation and experiment on leakage characteristics of floating ring seal

Effect of self-circulating treatment casing on rotor performance at different speeds

Application of EEMD and NRS in turboprop engine rotor fault diagnosis

Dynamic performance of super micro high speed air bearings

Related Author

Luohui OUYANG

Hai SHANG

Qingzhen BI

HU Tingxun

ZHOU Kun

WANG Xiaoyan

YAN Song

CHU Wuli

Related Institution

School of Mechanical Engineering，Shanghai Jiao Tong University

School of Power and Energy,Northwestern Polytechnical University

Collaborative Innovation Center for Advanced Aero-Engine

西安工业大学机电工程学院

北京航空航天大学能源与动力工程学院

AI问答

Postal code：100079
Tel：（010）53879206 Email：tmw@bjxintong.com.cn
Technical support is provided by Beijing Founder electronics co., LTD 京ICP备09082226号-64 京公网安备11010602201714号
It is recommended to read the content of this site in Chrome&IE9+. Please switch to extreme mode in browser 360.
Cookies We use cookies to help provide and enhance our service and tailor content. By continuing, you agree to the use of cookies.

⁰