Error in rotating sound source localization caused by installation deviation of microphone array

鲍欢; 杨明绥; 马威

doi:10.13224/j.cnki.jasp.2019.08.009

Chinese

您当前的位置：

首页 >

文章列表页 >

Error in rotating sound source localization caused by installation deviation of microphone array

更新时间：2026-07-07

- Error in rotating sound source localization caused by installation deviation of microphone array
- Vol. 34, Issue 8, Pages: 1708-1716(2019)
- 作者机构：
  
  1. 上海交通大学机械与动力工程学院,上海,200240
  2. 上海交通大学燃气轮机与民用航空发动机教育部工程研究中心,上海,200240
  3. 中国航空发动机集团有限公司沈阳发动机研究所,沈阳,110015
  4. 上海交通大学航空航天学院,上海,200240
- 作者简介：
- 基金信息：
- DOI：10.13224/j.cnki.jasp.2019.08.009
  CLC：
- Published：2019
- 稿件说明：
移动端阅览
鲍欢, 杨明绥, 马威. 麦克风阵列安装偏差引起的旋转声源定位误差[J]. 航空动力学报, 2019, 34(8): 1708-1716.

doi: 10.13224/j.cnki.jasp.2019.08.009
鲍欢, 杨明绥, 马威. 麦克风阵列安装偏差引起的旋转声源定位误差[J]. 航空动力学报, 2019, 34(8): 1708-1716. DOI： 10.13224/j.cnki.jasp.2019.08.009.

doi: 10.13224/j.cnki.jasp.2019.08.009 DOI：

摘要

对旋转声源定位中3种常见阵列安装偏差即角度偏差、x轴向偏移偏差、z轴向偏移偏差导致的定位误差进行了详细研究。结果表明:当角度偏差在-10°～10°范围内

声源定位位置误差随角度偏差呈近似线性变化

最大定位位置误差为0.089 m

定位强度误差呈随机变化

其中最小定位强度误差为0.97 dB

最大为4.69 dB;当x轴向偏移偏差在-0.1～0.1 m范围内

声源定位位置误差随x轴向偏移偏差呈近似线性变化

最大定位位置误差为0.098 m

定位强度误差呈随机变化

其中最小定位强度误差为0.91 dB

最大为4.94 dB;当z轴向偏移偏差在-0.1～0.1 m范围内

最大定位位置误差为0.01 m

正偏移偏差引起的定位强度误差总体小于负偏移偏差

其中最小定位强度误差为0.81 dB

最大为4.51 dB。研究结果可为麦克风阵列在实际应用中控制测量误差提供指导。

Abstract

The localization error caused by three types of common array installation deviation

namely angular deviation

x-axis offset deviation and z-axis offset deviation was studied in detail in the rotating sound source localization. Research showed that when angular deviation was within the range from -10° to 10°

the position error varied approximately linearly with the angular deviation

the maximum positioning error was 0.089 m

the strength error was randomly distributed

the minimum strength error was 0.97 dB and the maximum strength error was 4.69 dB; when x-axis offset deviation was within the range from -0.1 m to 0.1 m

the position error varied approximately linearly with x-axis offset deviation

the maximum positioning error was 0.098 m

the strength error was randomly distributed

the minimum strength error was 0.91 dB and the maximum strength errors was 4.94 dB; when z-axis offset deviation was within the range from -0.1 m to 0.1 m

the maximum positioning error was 0.01 m

strength error caused by the positive z-axis offset deviation was smaller than the negative z-axis offset deviation generally

the minimum strength error was 0.81 dB and the maximum strength error was 4.51 dB. Research results can provide guidance for controlling the localization error of microphone arrays in practical applications.

关键词

Keywords

references

Views

388

下载量

CSCD

Alert me when the article has been cited

提交

Tools

Publicity Resources

Identification of fan surge precursors based on acoustic array signals

Application of advanced beamforming in rotating sound source localization

In-duct circumferential acoustic mode measurement of axial fan/compressor

基于三维接触摩擦单元的套齿连接解析建模研究

与发动机匹配的旁路式双喉道气动矢量喷管数值模拟研究

Related Author

LI Zepeng

QIAO Baijie

WEN Bi

CHEN Xuefeng

ZHOU Wei

BAO Huan

YANG Mingsui

MA Wei

Related Institution

School of Mechanical Engineering,Xi’an Jiaotong University

The State Key Laboratory for Manufacturing Systems Engineering,School of Mechanical Engineering,Xi’an Jiaotong University

Sichuan Gas Turbine Establishment,Aero Engine Corporation of China

School of Power and Energy, Northwestern Polytechnical University,Xian

AI问答

Postal code：100079
Tel：（010）53879206 Email：tmw@bjxintong.com.cn
Technical support is provided by Beijing Founder electronics co., LTD 京ICP备09082226号-64 京公网安备11010602201714号
It is recommended to read the content of this site in Chrome&IE9+. Please switch to extreme mode in browser 360.
Cookies We use cookies to help provide and enhance our service and tailor content. By continuing, you agree to the use of cookies.

⁰