Effects of fully shielded guiding strut on infrared signatures of exhaust system

WANG Hao; JI Honghu; SANG Xueyi

doi:10.13224/j.cnki.jasp.2020.10.007

Chinese

您当前的位置：

首页 >

文章列表页 >

Effects of fully shielded guiding strut on infrared signatures of exhaust system

更新时间：2026-07-07

- Effects of fully shielded guiding strut on infrared signatures of exhaust system
- Vol. 35, Issue 10, Pages: 2078-2088(2020)
- 作者机构：
- 作者简介：
- 基金信息：
- DOI：10.13224/j.cnki.jasp.2020.10.007
  CLC：
- Published：2020
- 稿件说明：
移动端阅览
王浩, 吉洪湖, 桑学仪. 全遮挡导流支板对排气系统红外特性的影响[J]. 航空动力学报, 2020, 35(10): 2078-2088.

doi: 10.13224/j.cnki.jasp.2020.10.007
王浩, 吉洪湖, 桑学仪. 全遮挡导流支板对排气系统红外特性的影响[J]. 航空动力学报, 2020, 35(10): 2078-2088. DOI： 10.13224/j.cnki.jasp.2020.10.007.

doi: 10.13224/j.cnki.jasp.2020.10.007 DOI：

摘要

为了降低末级涡轮转子对排气系统尾向红外(IR)辐射贡献

对涡轮后导流支板进行低红外特征结构设计

通过模型试验的方法研究了基准轴对称排气系统和不同支板冷却状态的全遮挡导流支板(FSGS)排气系统的红外特性。研究结果表明:全遮挡导流支板表面温度低于末级涡轮表面温度

但全遮挡导流支板结构会使下游隔热屏和喷管壁面温度明显升高;全遮挡导流支板对排气系统尾向0~10°角域红外辐射有较好的抑制作用

正尾向红外辐射强度比基准轴对称排气系统低13.9%;支板壁面气膜冷能进一步降低排气系统尾向0~10°角域内的红外辐射强度

支板冷却气密流比(BR)为0.5、0.7和0.9时

全遮挡导流支板排气系统0°方向的红外辐射强度的降幅分别为18.1%、25.8%和34.5%。因此

带气膜冷却的全遮挡导流支板是抑制末级涡轮对排气系统红外辐射贡献的一种非常有效的手段。

Abstract

In order to suppress the contribution of the last-stage turbine rotor to the infrared (IR) radiation in backward of the exhaust system

the fully shielded guiding strut (FSGS) was designed. IR signatures of the baseline axisymmetric exhaust system and the exhaust system with FSGS under different cooling conditions were obtained by experiments. The results indicated that the wall temperature of the FSGS was lower than that of the last-stage turbine rotor. However

the wall temperatures of the heat shield and nozzle of the exhaust system with the FSGS increased. FSGS had an outstanding effect on suppressing the IR radiation of the exhaust system within the directions of 0° ~ 10°

and its IR radiation intensity was 13.9% lower than that of the baseline axisymmetric exhaust system at 0° detection angle. The application of film cooling on the FSGS can further reduce the IR radiation of the exhaust system in those directions mentioned above. Under the blowing ratios (BR) of 0.5

0.7 and 0.9

the IR radiation intensity of the exhaust system at 0° detection angle was weakened by 18.1%

25.8% and 34.5%

respectively. Therefore

the FSGS with film cooling is a very effective way to suppress the IR contribution of the last-stage turbine to the exhaust system.

关键词

Keywords

references

Views

346

下载量

CSCD

Alert me when the article has been cited

提交

Tools

Publicity Resources

Experiment on infrared characteristics suppression by component cooling of twodimensional convergentdivergent vectoring nozzle exhaust system

Flow and heat transfer characteristics of round⁃hole film cooling with crater

Numerical study on effect of film ejections in rotating detonation engine combustor

Effect of inaccurate source term loading on simulation ,precision for source term model

Film cooling enhancement by using upstream sand-dune-shaped ramp

Related Author

卢浩浩

吉洪湖

王丁

刘健

王浩

Hai WANG

Fangsu FAN

Jian PU

Related Institution

南京航空航天大学能源与动力学院

Department of Thermal Science and Energy Engineering，University of Science and Technology of China

Shenyang Engine Research Institute，Aero Engine Corporation of China

College of Energy and Power Engineering，Nanjing University of Aeronautics and Astronautics

Aero Engine Academy of China，Aero Engine Corporation of China

AI问答

Postal code：100079
Tel：（010）53879206 Email：tmw@bjxintong.com.cn
Technical support is provided by Beijing Founder electronics co., LTD 京ICP备09082226号-64 京公网安备11010602201714号
It is recommended to read the content of this site in Chrome&IE9+. Please switch to extreme mode in browser 360.
Cookies We use cookies to help provide and enhance our service and tailor content. By continuing, you agree to the use of cookies.

⁰