Design of improving volumetric efficiency of hypersonic waverider and rapid prediction of flow field

HOU Qiang; SU Weiyi; SUN Fei

doi:10.13224/j.cnki.jasp.2021.03.012

Chinese

您当前的位置：

首页 >

文章列表页 >

Design of improving volumetric efficiency of hypersonic waverider and rapid prediction of flow field

更新时间：2026-07-07

- Design of improving volumetric efficiency of hypersonic waverider and rapid prediction of flow field
- Vol. 36, Issue 3, Pages: 564-574(2021)
- 作者机构：
- 作者简介：
- 基金信息：
- DOI：10.13224/j.cnki.jasp.2021.03.012
  CLC：
- Published：2021
- 稿件说明：
移动端阅览
侯强, 苏纬仪, 孙斐. 高超声速乘波体扩容设计及流场快速预测[J]. 航空动力学报, 2021, 36(3): 564-574.

doi: 10.13224/j.cnki.jasp.2021.03.012
侯强, 苏纬仪, 孙斐. 高超声速乘波体扩容设计及流场快速预测[J]. 航空动力学报, 2021, 36(3): 564-574. DOI： 10.13224/j.cnki.jasp.2021.03.012.

doi: 10.13224/j.cnki.jasp.2021.03.012 DOI：

摘要

为发展一种兼具乘波体高升阻比和升力体高容积率的气动设计与预测方法

开展了3个方面的研究工作。基于升力体和乘波体融合设计理念

提出了一种大容积率、高升阻比的乘波前体的扩容设计方法。对扩容设计的乘波前体进行了数值模拟

获得了典型设计参数对前体容积率、升阻比等气动性能参数的影响规律。基于本征正交分解理论和径向基函数建立了高超声速乘波前体流场结构和气动性能参数的快速预测模型

并对扩容设计的乘波前体流场开展了快速预测研究。研究表明:相比于未扩容之前

高度为5、10 mm时

容积增加8.00%和15.00%;基于本征正交分解理论的快速预测方法可精确、快速地获得不同几何设计参数下乘波前体的流场

预测误差不高于2.00%。

Abstract

In order to develop an aerodynamic design and prediction method that combines the high lift-to-drag ratio of waverider and the high volumetric efficiency of lifting vehicle

research was carried out in three aspects. Based on fusion design concept of lifting vehicle and waverider

a hypersonic waverider design method with large volumetric efficiency and high lift-drag ratio was proposed. Numerical simulation was carried out to obtain the influence of typical design parameters on the aerodynamic performance

such as the volumetric efficiency and lift-drag ratio. Based on the proper orthogonal decomposition method and radial basis function

a rapid prediction model of hypersonic waverider flow field and aerodynamic performance was established and the rapid prediction of flow field was studied. The research showed that compared with ordinary waverider

when the height was 5 and 10 mm

the volume increased by 8.00% and 15.00%; the rapid prediction method based on the proper orthogonal decomposition method can accurately and quickly obtain the flow field of waverider with different design parameters and the prediction error was not higher than 2.00%.

关键词

Keywords

references

Views

164

下载量

CSCD

Alert me when the article has been cited

提交

Tools

Publicity Resources

Reduced order method of blade rubbing system based on proper orthogonal decomposition

Experiment on primary atomization of flat prefilm nozzle under high temperature and high pressure

Modal decomposition and rapid prediction of shock train oscillation for inlet

Experiment on primary atomization characteristics of planar prefilming nozzle

Flame structure and dynamics characters investigation by OH and CH2O planar laser-induced fluorescence in the swirl combustor

Related Author

Daitong WEI

Xing CHEN

Yugang CHEN

Hongkun LI

Dong DI

Ping ZHANG

Teng ZHANG

Yingwen YAN

Related Institution

School of Mechanical Engineering，Dalian University of Technology

College of Energy and Power Engineering，Nanjing University of Aeronautics and Astronautics

College of Energy and Power Engineering,Nanjing University of Aeronautics and Astronautics

中国科学院大学工程科学学院

中国科学院力学研究所高温气体动力学国家重点实验室

AI问答

Postal code：100079
Tel：（010）53879206 Email：tmw@bjxintong.com.cn
Technical support is provided by Beijing Founder electronics co., LTD 京ICP备09082226号-64 京公网安备11010602201714号
It is recommended to read the content of this site in Chrome&IE9+. Please switch to extreme mode in browser 360.
Cookies We use cookies to help provide and enhance our service and tailor content. By continuing, you agree to the use of cookies.

⁰