Research on methods of uplink quality improvement in LTE system
摘要
随着Vo LTE业务的商用以及4G用户大规模增加
4G网络不仅承担数据业务
还承担着语音业务
这对上行链路质量提出了更高的要求。本文利用功率余量值表征LTE上行链路质量
通过挖掘并调整上行性能参数对其进行快速地提升。结合核心城区低功率余量TOP小区的实际情况
探究低功率余量报告小区占比高的主要原因
并提出一套区别于传统优化方式的参数优化方案以实现低功率余量报告小区占比下降
达到上行链路质量提升的目的。通过试点验证可知
目前核心城区上行低功率余量报告问题小区占比已由3.94%降至1.48%。
Abstract
With the commercialization of VoLTE services and the large scale increase of 4G users
4G networks not only undertake data services but also voice services
which puts forward higher requirements for uplink quality.With the increasing complexity of network structure and wireless environment
LTE link quality restricts the performance of LTE network to a great extent.The degree of interference
coverage
or capacity limitation of the LTE network directly affects the actual perception of users such as call quality
upload and download rates
and time delay
and also causes a series of problems such as failure to connect
drop calls and handover failure.In this paper
the power margin value PH is used to characterize the uplink quality of LTE
and the uplink performance parameters are mined and adjusted to quickly improve the uplink quality.Combined with the practical problems of top cells with low power margin in core urban area
this paper explores the main reasons for the high proportion of low PHR cells and proposes a set of parameter optimization scheme different from the traditional optimization method
so as to reduce the proportion of low PHR cells and improve the uplink quality.Through pilot verification
it can be seen that the proportion of cells with low PHR problems in the core urban area has been reduced from 3.94% to 1.48%.