哈尔滨理工大学材料科学与工程学院
纸质出版:2009
移动端阅览
梁慧燕, 郭英奎, 安勇良, 等. 固相含量对凝胶注模成型ZrO_2陶瓷力学性能的影响[J]. 哈尔滨理工大学学报, 2009,14(2):111-114.
LIANG Hui-yan, GUO Ying-kui, AN Yong-liang, et al. Solid Content on Gel-casting Mechanical Properties of ZrO_2 Ceramic[J]. 2009, 14(2): 111-114.
梁慧燕, 郭英奎, 安勇良, 等. 固相含量对凝胶注模成型ZrO_2陶瓷力学性能的影响[J]. 哈尔滨理工大学学报, 2009,14(2):111-114. DOI:
LIANG Hui-yan, GUO Ying-kui, AN Yong-liang, et al. Solid Content on Gel-casting Mechanical Properties of ZrO_2 Ceramic[J]. 2009, 14(2): 111-114. DOI:
采用凝胶注模工艺分别制备体积分数为36%、38%、40%、42%和44%的ZrO2陶瓷坯体
在1 600℃进行无压烧结
通过电子万能试验机、扫描电镜等测试手段分别对ZrO2陶瓷材料的力学性能和显微结构进行测试和分析
结果表明
固相体积分数为38%时
陶瓷材料的相对密度、抗弯强度和断裂韧性最大
分别为98.36%、921.34MPa和11.49MPa.m1/2
这是由于固相体积分数为38%的浆料流动性好
气孔少
制备出的ZrO2陶瓷坯体缺陷少.
In this paper
the green body of ZrO2 ceramic were successfully prepared by gel-casting
of which solid contents are 36%
38%
40%
42% and 44%
respectively
then no pressure sintered at 1600℃
the property and microstructure of ZrO2 ceramic were investigated by Electronic Universal Testing Machine and SEM.The results show that
when solid content is 38%
they are the greatest value that the relative density
bending strength and fracture toughness of ZrO2 ceramic
which are 98.36%
921.34MPa and 11.49MPa·m1/2
respecti...
0
浏览量
2262
下载量
CSCD
关联资源
相关文章
相关作者
相关机构