M. J. Holzweissig, M. C. Uslu, H.-G. Lambers, 等. A Comparative Analysis of Austenite-to-Martensite and Austenite-to-Bainite Phase Transformation Kinetics in Steels[J]. 材料研究快报(英文), 2013,1(3):141-147.
M. J. Holzweissig, M. C. Uslu, H.-G. Lambers, et al. A Comparative Analysis of Austenite-to-Martensite and Austenite-to-Bainite Phase Transformation Kinetics in Steels[J]. Materials Research Letters, 2013, 1(3): 141-147.
M. J. Holzweissig, M. C. Uslu, H.-G. Lambers, 等. A Comparative Analysis of Austenite-to-Martensite and Austenite-to-Bainite Phase Transformation Kinetics in Steels[J]. 材料研究快报(英文), 2013,1(3):141-147.DOI: 10.1080/21663831.2013.798748.
M. J. Holzweissig, M. C. Uslu, H.-G. Lambers, et al. A Comparative Analysis of Austenite-to-Martensite and Austenite-to-Bainite Phase Transformation Kinetics in Steels[J]. Materials Research Letters, 2013, 1(3): 141-147.DOI: 10.1080/21663831.2013.798748.
A Comparative Analysis of Austenite-to-Martensite and Austenite-to-Bainite Phase Transformation Kinetics in Steels
This paper presents a comparison of the macroscopic transformation strain evolution as a function of the bainite and martensite phase fractions in steels. Specifically
the evolution of anisotropic strain with phase fraction follows a linear trend for the martensitic transformation due to continuous stress-induced variant selection. In the case of bainitic transformation
the anisotropic strain evolves non-linearly owing to diffusion
minimizing the distortion around the bainitic sheaves and further promoting stress-induced variant selection at the early stages of the bainitic phase transformation. However
this effectiveness is reduced when the bainitic sheaves start constricting the growth of each other.
New transformation mechanism of TiB from Bf to B27 structure in β-solidified TiAl alloys
Decoding deformation-induced phase transformation in a high entropy alloy via nanoindentation pop-in phenomenon
Simultaneously improving strength and ductility of laser-powder-bed-fused Al–Zn–Mg–Cu–Ti alloys by controlling phase structure of Al3Ti
Achieving uniform and wide phase transformation hysteresis in twin-wire arc additive manufactured NiTiNb alloy
Achieving high strength-ductility synergy via layer-wise heterogeneous structure of additively manufactured reduced activation ferrite/martensite steel
相关作者
Songkuan Zhao
Bin Tang
Beibei Wei
Lei Zhu
Jinshan Li
Abhijeet Dhal
Shreya Mukherjee
Roopam Jain
相关机构
c Shaanxi Key Laboratory of Electrical Materials and Infiltration Technology School of Materials Science and Engineering Xi'an University of Technology
b Chongqing Innovation Center Northwestern Polytechnical University
a State Key Laboratory of Solidification Processing Northwestern Polytechnical University Xi'an People’s Republic of China
a State Key Laboratory of Solidification Processing Northwestern Polytechnical University
b Department of Mechanical Engineering University of North Texas Denton