Effect of Microstructure on the Deformation Mechanism of Friction Stir-Processed Al0.1CoCrFeNi High Entropy Alloy

M. Komarasamy; N. Kumar; Z. Tang; R.S. Mishra; P.K. Liaw

doi:10.1080/21663831.2014.958586

Chinese

您当前的位置：

首页 >

文章列表页 >

Effect of Microstructure on the Deformation Mechanism of Friction Stir-Processed Al0.1CoCrFeNi High Entropy Alloy

Original Reports | 更新时间：2026-08-19

- Effect of Microstructure on the Deformation Mechanism of Friction Stir-Processed Al0.1CoCrFeNi High Entropy Alloy
- Effect of Microstructure on the Deformation Mechanism of Friction Stir-Processed Al0.1CoCrFeNi High Entropy Alloy
- 材料研究快报（英文） 2015年3卷第1期页码：30-34
- 作者机构：
  
  1. Department of Materials Science and Engineering Center for Friction Stir Processing University of North Texas Denton
  2. Department of Materials Science and Engineering The University of Tennessee Knoxville
- 作者简介：
- 基金信息：
- DOI：10.1080/21663831.2014.958586
  中图分类号：
- 网络首发：2014-09-15，
  
  纸质出版：2015
- 稿件说明：
移动端阅览
M. Komarasamy, N. Kumar, Z. Tang, 等. Effect of Microstructure on the Deformation Mechanism of Friction Stir-Processed Al0.1CoCrFeNi High Entropy Alloy[J]. 材料研究快报（英文）, 2015,3(1):30-34.

M. Komarasamy, N. Kumar, Z. Tang, et al. Effect of Microstructure on the Deformation Mechanism of Friction Stir-Processed Al0.1CoCrFeNi High Entropy Alloy[J]. Materials Research Letters, 2015, 3(1): 30-34.
M. Komarasamy, N. Kumar, Z. Tang, 等. Effect of Microstructure on the Deformation Mechanism of Friction Stir-Processed Al0.1CoCrFeNi High Entropy Alloy[J]. 材料研究快报（英文）, 2015,3(1):30-34. DOI： 10.1080/21663831.2014.958586.

M. Komarasamy, N. Kumar, Z. Tang, et al. Effect of Microstructure on the Deformation Mechanism of Friction Stir-Processed Al0.1CoCrFeNi High Entropy Alloy[J]. Materials Research Letters, 2015, 3(1): 30-34. DOI： 10.1080/21663831.2014.958586.

摘要

Grain refinement from several millimeters in as-received (AR) condition to the range of 0.35–15 μm was achieved by friction stir processing (FSP). Due to the sluggish nature of atomic diffusion in high entropy alloys (HEAs)

the FSP region exhibited an immense variation in microstructure which was directly attributed to the accumulated plastic strain during FSP. In accordance with the Hall–Petch relationship

yield strength (YS) has increased by a factor of four after grain refinement while maintaining large uniform elongation (UE). The Kocks–Mecking plot indicated different deformation mechanisms operative in both FSP and AR conditions.

Abstract

the FSP region exhibited an immense variation in microstructure which was directly attributed to the accumulated plastic strain during FSP. In accordance with the Hall–Petch relationship

关键词

Keywords

references

浏览量

下载量

135

CSCD

文章被引用时，请邮件提醒。

提交

工具集

关联资源

Multiple deformation mechanisms induce high work hardening in Ti–5Al–7.5 V alloy via transformed β matrix

Constitutive modeling of deformation behavior of high-entropy alloys with face-centered cubic crystal structure

A precipitation-tailoring paradigm for nucleation control: breaking the efficiency ceiling of Mg-Zr grain refiner

Contributions and role of B2 nanoparticles in the exceptional strength/ductility trade-offs of Al0.3CoCrFeMnNi high entropy alloy

Significantly extending the gradient layer and mechanical properties of Mg alloys by texture optimization

相关机构

State Key Laboratory of Solidification Processing Northwestern Polytechnical University

Department of Materials Science and Engineering Pohang University of Science and Technology (POSTECH)

Center for High Entropy Alloys Pohang University of Science and Technology (POSTECH)

Nuclear Materials Safety Research Division Korea Atomic Energy Research Institute (KAERI)

Department of Materials Science and Engineering National Tsing Hua University

AI问答

地址：北京市丰台区顺八条1号院2号楼北阳晨光大厦2层邮编：100079
联系电话：（010）53879206 Email：tmw@bjxintong.com.cn
技术支持由北京北大方正电子有限公司提供京ICP备09082226号-64 京公网安备11010602201714号
本系统建议在Chrome、 IE9+ 以上版本浏览器阅读本站内容，360浏览器请切换至极速模式
Cookies帮助我们提供服务并提供个性化体验。使用本网站，即表示您同意我们使用Cookies

⁰