S. Fu, H. Bei, Y. Chen, 等. Deformation mechanisms and work-hardening behavior of transformation-induced plasticity high entropy alloys by in -situ neutron diffraction[J]. 材料研究快报(英文), 2018,6(11):620-626.
S. Fu, H. Bei, Y. Chen, et al. Deformation mechanisms and work-hardening behavior of transformation-induced plasticity high entropy alloys by in -situ neutron diffraction[J]. Materials Research Letters, 2018, 6(11): 620-626.
S. Fu, H. Bei, Y. Chen, 等. Deformation mechanisms and work-hardening behavior of transformation-induced plasticity high entropy alloys by in -situ neutron diffraction[J]. 材料研究快报(英文), 2018,6(11):620-626.DOI: 10.1080/21663831.2018.1523239.
S. Fu, H. Bei, Y. Chen, et al. Deformation mechanisms and work-hardening behavior of transformation-induced plasticity high entropy alloys by in -situ neutron diffraction[J]. Materials Research Letters, 2018, 6(11): 620-626.DOI: 10.1080/21663831.2018.1523239.
Deformation mechanisms and work-hardening behavior of transformation-induced plasticity high entropy alloys by in -situ neutron diffraction
BSTRACTA full picture of tensile deformation mechanism evolution in the FCC-to-HCP transformation-induced plasticity high entropy alloy (TRIP-HEA) was revealed by real-time
in situ
neutron diffraction. Three transition points
i.e. the triggering of TRIP in the FCC phase and the activation of single and multiple twinning in the HCP phase
were identified to result in significant stress redistribution. Accordingly
four deformation stages with distinct phase-specific work-hardening behaviors were recognized. It was concluded that the easily-triggered persisting TRIP and the work-hardening potential of the HCP contribute together to the persisting bulk work-hardening.
Selective laser melting enabling the hierarchically heterogeneous microstructure and excellent mechanical properties in an interstitial solute strengthened high entropy alloy
New transformation mechanism of TiB from Bf to B27 structure in β-solidified TiAl alloys
Significantly extending the gradient layer and mechanical properties of Mg alloys by texture optimization
Decoding deformation-induced phase transformation in a high entropy alloy via nanoindentation pop-in phenomenon
Simultaneously improving strength and ductility of laser-powder-bed-fused Al–Zn–Mg–Cu–Ti alloys by controlling phase structure of Al3Ti
相关作者
Z. G. Zhu
X. H. An
W. J. Lu
Z. M. Li
F. L. Ng
X. Z. Liao
U. Ramamurty
S. M. L. Nai
相关机构
Singapore Institute of Manufacturing Technology
School of Aerospace Mechanical and Mechatronic Engineering The University of Sydney
Max-Planck-Institut für Eisenforschung
School of Mechanical and Aerospace Engineering Nanyang Technological University
a State Key Laboratory of Solidification Processing Northwestern Polytechnical University