Ultrahigh strength and plasticity in laser rapid solidified Al–Si nanoscale eutectics

Huai-Hsun Lien; Jyoti Mazumder; Jian Wang; Amit Misra

doi:10.1080/21663831.2020.1755380

Chinese

您当前的位置：

首页 >

文章列表页 >

Ultrahigh strength and plasticity in laser rapid solidified Al–Si nanoscale eutectics

Original Reports | 更新时间：2026-08-19

- Ultrahigh strength and plasticity in laser rapid solidified Al–Si nanoscale eutectics
- Ultrahigh strength and plasticity in laser rapid solidified Al–Si nanoscale eutectics
- 材料研究快报（英文） 2020年8卷第8期页码：291-298
- 作者机构：
  
  1. Materials Science and Engineering University of Michigan Ann Arbor
  2. Materials Science and Engineering University of Michigan Ann Arbor MI USA
  3. Mechanical Engineering University of Michigan Ann Arbor
  4. Mechanical and Materials Engineering University of Nebraska-Lincoln,Lincoln
- 作者简介：
- 基金信息：
- DOI：10.1080/21663831.2020.1755380
  中图分类号：
- 网络首发：2020-04-28，
  
  纸质出版：2020
- 稿件说明：
移动端阅览
Huai-Hsun Lien, Jyoti Mazumder, Jian Wang, 等. Ultrahigh strength and plasticity in laser rapid solidified Al–Si nanoscale eutectics[J]. 材料研究快报（英文）, 2020,8(8):291-298.

Huai-Hsun Lien, Jyoti Mazumder, Jian Wang, et al. Ultrahigh strength and plasticity in laser rapid solidified Al–Si nanoscale eutectics[J]. Materials Research Letters, 2020, 8(8): 291-298.
Huai-Hsun Lien, Jyoti Mazumder, Jian Wang, 等. Ultrahigh strength and plasticity in laser rapid solidified Al–Si nanoscale eutectics[J]. 材料研究快报（英文）, 2020,8(8):291-298. DOI： 10.1080/21663831.2020.1755380.

Huai-Hsun Lien, Jyoti Mazumder, Jian Wang, et al. Ultrahigh strength and plasticity in laser rapid solidified Al–Si nanoscale eutectics[J]. Materials Research Letters, 2020, 8(8): 291-298. DOI： 10.1080/21663831.2020.1755380.

摘要

Abstract

BSTRACTAs-cast Al–20wt.% Si alloys were processed via laser rapid solidification (LRS) techniques to create eutectic microstructures with nanoscale interconnected

nanotwinned Si fibers. LRS morphologies exhibit higher flow stress

exceeding 800 MPa and uniform plastic deformation above 20% compared to as-cast alloy that fractures at strains below 8% at flow strength of approximately 200 MPa. The strengthening mechanisms of LRS morphologies are interpreted in terms of the interfacial constraints: increase in yield strength as well as strain hardening rate due to nanoscale confined slip in fibrous Al–Si eutectic

and load transfer and eventual plasticity in the nanoscale Si fibers.

关键词

Keywords

references

浏览量

下载量

CSCD

文章被引用时，请邮件提醒。

提交

工具集

关联资源

In situ characterization of tensile behavior of laser rapid solidified Al–Si heterogeneous microstructures

Achieving an ultrastrong yet ductile copper alloy via microstructural heterogeneity with dense ordered nanoprecipitates

Additive manufacturing of metals and alloys to achieve heterogeneous microstructures for exceptional mechanical properties

Heterogeneous microstructure of the bonding zone and its dependence on preheating in hybrid manufactured Ti-6Al-4V

Strong and ductile reduced activation ferritic/martensitic steel additively manufactured by selective laser melting

相关机构

d Nebraska Center for Materials and Nanoscience University of Nebraska-Lincoln

a Department of Mechanical and Materials of Engineering University of Nebraska-Lincoln Lincoln NE USA

b Department of Materials Science and Engineering University of Michigan Ann Arbor USA

c Department of Mechanical Engineering University of Michigan Ann Arbor

b Department of Materials Science and Engineering University of Michigan

AI问答

地址：北京市丰台区顺八条1号院2号楼北阳晨光大厦2层邮编：100079
联系电话：（010）53879206 Email：tmw@bjxintong.com.cn
技术支持由北京北大方正电子有限公司提供京ICP备09082226号-64 京公网安备11010602201714号
本系统建议在Chrome、 IE9+ 以上版本浏览器阅读本站内容，360浏览器请切换至极速模式
Cookies帮助我们提供服务并提供个性化体验。使用本网站，即表示您同意我们使用Cookies

⁰