Twin-coupled shear bands in an ultrafine-grained CoCrFeMnNi high-entropy alloy deformed at 77K
Original Reports|更新时间:2026-08-19
|
Twin-coupled shear bands in an ultrafine-grained CoCrFeMnNi high-entropy alloy deformed at 77K
Twin-coupled shear bands in an ultrafine-grained CoCrFeMnNi high-entropy alloy deformed at 77K
材料研究快报(英文)2022年10卷第6期 页码:385-391
作者机构:
1. a Center of Electron Microscopy and State Key Laboratory of Silicon Materials School of Materials Science and Engineering Zhejiang University Hangzhou People’s Republic of China
2. b Wenzhou Key Laboratory of Novel Optoelectronic and Nano Materials Institute of Wenzhou Zhejiang University
3. Shi-changxu Innovation Center for Advanced Materials Institute of Metal Research Chinese Academy of Sciences,c
4. d Department of Materials Science and Engineering University of Toronto
5. e School of Mechanical and Aerospace Engineering College of Engineering Nanyang Technological University
6. f Key Laboratory for Anisotropy and Texture of Materials Ministry of Education School of Materials Science and Engineering Northeastern University
BSTRACTTwo different types of shear bands generate in ultrafine-grained (UFG) CoCrFeMnNi high-entropy alloys deformed at 77 K
i.e. commonly-observed low angle grain boundary (LAGB) type and unusual twin-coupled type. Twin-coupled shear bands exhibit a misorientation of 56–67° with the matrix
in contrast to the LAGB shear band with a misorientation of 6–12°. Both annealing twins and deformation twins can act as precursor for twin-coupled shear bands
where dislocation accumulation along twin boundaries can tune the orientation of twin lamella. These observations suggest that twin-coupled shear bands can act as an important plastic carrier in materials deformed under extreme conditions.
Abstract
BSTRACTTwo different types of shear bands generate in ultrafine-grained (UFG) CoCrFeMnNi high-entropy alloys deformed at 77 K
i.e. commonly-observed low angle grain boundary (LAGB) type and unusual twin-coupled type. Twin-coupled shear bands exhibit a misorientation of 56–67° with the matrix
in contrast to the LAGB shear band with a misorientation of 6–12°. Both annealing twins and deformation twins can act as precursor for twin-coupled shear bands
where dislocation accumulation along twin boundaries can tune the orientation of twin lamella. These observations suggest that twin-coupled shear bands can act as an important plastic carrier in materials deformed under extreme conditions.