In-situ observation of deformation twin associated sub-grain boundary formation in copper single crystal under bending

Shuang Li; Lei Li; Ayoub Soulami; Cynthia A. Powell; Suveen Mathaudhu; Arun Devaraj; Chongmin Wang

doi:10.1080/21663831.2022.2057201

Chinese

您当前的位置：

首页 >

文章列表页 >

In-situ observation of deformation twin associated sub-grain boundary formation in copper single crystal under bending

Original Reports | 更新时间：2026-08-19

- In-situ observation of deformation twin associated sub-grain boundary formation in copper single crystal under bending
- In-situ observation of deformation twin associated sub-grain boundary formation in copper single crystal under bending
- 材料研究快报（英文） 2022年10卷第7期页码：488-495
- 作者机构：
  
  1. a Environmental Molecular Sciences Laboratory Pacific Northwest National Laboratory Richland
  2. b Physical and Computational Sciences Directorate Pacific Northwest National Laboratory Richland
  3. c Energy and Environment Directorate Pacific Northwest National Laboratory Richland
  4. c Energy and Environment Directorate Pacific Northwest National Laboratory Richland WA USA
  5. d Metallurgical and Materials Engineering Department Colorado School of Mines Golden
- 作者简介：
- 基金信息：
- DOI：10.1080/21663831.2022.2057201
  中图分类号：
- 网络首发：2022-04-14，
  
  纸质出版：2022
- 稿件说明：
移动端阅览
Shuang Li, Lei Li, Ayoub Soulami, 等. In-situ observation of deformation twin associated sub-grain boundary formation in copper single crystal under bending[J]. 材料研究快报（英文）, 2022,10(7):488-495.

Shuang Li, Lei Li, Ayoub Soulami, et al. In-situ observation of deformation twin associated sub-grain boundary formation in copper single crystal under bending[J]. Materials Research Letters, 2022, 10(7): 488-495.
Shuang Li, Lei Li, Ayoub Soulami, 等. In-situ observation of deformation twin associated sub-grain boundary formation in copper single crystal under bending[J]. 材料研究快报（英文）, 2022,10(7):488-495. DOI： 10.1080/21663831.2022.2057201.

Shuang Li, Lei Li, Ayoub Soulami, et al. In-situ observation of deformation twin associated sub-grain boundary formation in copper single crystal under bending[J]. Materials Research Letters, 2022, 10(7): 488-495. DOI： 10.1080/21663831.2022.2057201.

摘要

Abstract

In this work

we use

in-situ

TEM in combination with finite elemental analysis to reveal the sub-grain boundary formation during bending of Cu single crystal. The deformation process is featured by dislocations propagation

formation of stacking faults and deformation twins

and subsequent formation of a sub-grain boundary. Finite element analysis of stress distribution indicates the stacking faults and deformation twins are all initiated from the region that corresponds to the maximum shear stress. The formation of the sub-grain boundary is through the intersection between primary and secondary stacking faults/deformation twins.

关键词

Keywords

references

浏览量

下载量

CSCD

文章被引用时，请邮件提醒。

提交

工具集

关联资源

Breaking mixture rule of strength and ductility by interface induced nano-scale heterostructure in TA1/304 composites

Excellent strength-ductility balance of fully recrystallized fine-grained Mg-Y-Zn-Ni extrusion alloy with 14H-LPSO lamellas

The activation of multiple slip systems in polycrystalline zirconium by using automated lattice rotation framework

Role of microscopic degrees of freedom in mechanical response of bicrystal nanopillars

In-situ atomic-scale observation of dislocation and deformation twin interaction in FeMnCoCr high-entropy alloy

相关机构

State Key Laboratory of High-Performance Roll Materials and Composite Forming School of Materials Science and Engineering Hebei University of Technology

d Institute of Materials Intelligent Technology Liaoning Academy of Materials

c School of Materials Science and Engineering Taiyuan University of Science and Technology

a School of Materials Science and Engineering MOE jointly Collaborative Innovation Center for High-performance Al/Mg based Materials Shanxi Key Laboratory of Intelligent Casting and Advanced Forming for New Materials North University of China Taiyuan People’s Republic of China

b Beijing Advanced Innovation Center for Materials Genome Engineering University of Science and Technology Beijing Beijing People’s Republic of China

AI问答

地址：北京市丰台区顺八条1号院2号楼北阳晨光大厦2层邮编：100079
联系电话：（010）53879206 Email：tmw@bjxintong.com.cn
技术支持由北京北大方正电子有限公司提供京ICP备09082226号-64 京公网安备11010602201714号
本系统建议在Chrome、 IE9+ 以上版本浏览器阅读本站内容，360浏览器请切换至极速模式
Cookies帮助我们提供服务并提供个性化体验。使用本网站，即表示您同意我们使用Cookies

⁰