Simultaneously enhancing strength and ductility of selective laser melted AlSi10Mg via introducing in-cell Al4C3 nanorods

Jie Wan; Kangan Li; Huarui Geng; Biao Chen; Jianghua Shen; Yazhou Guo; Katsuyoshi Kondoh; Abdollah Bahador; Jinshan Li

doi:10.1080/21663831.2023.2173028

Chinese

您当前的位置：

首页 >

文章列表页 >

Simultaneously enhancing strength and ductility of selective laser melted AlSi10Mg via introducing in-cell Al4C3 nanorods

Original Reports | 更新时间：2026-08-19

- Simultaneously enhancing strength and ductility of selective laser melted AlSi10Mg via introducing in-cell Al4C3 nanorods
- Simultaneously enhancing strength and ductility of selective laser melted AlSi10Mg via introducing in-cell Al4C3 nanorods
- 材料研究快报（英文） 2023年11卷第6期页码：422-429
- 作者机构：
  
  1. a State Key Laboratory of Solidification Processing Northwestern Polytechnical University Xi’an Shaanxi People’s Republic of China
  2. b Chongqing Innovation Center Northwestern Polytechnical University
  3. a State Key Laboratory of Solidification Processing Northwestern Polytechnical University Xi’an
  4. c School of Aeronautics Northwestern Polytechnical University
  5. d Joining and Welding Research Institute Osaka University
- 作者简介：
- 基金信息：
- DOI：10.1080/21663831.2023.2173028
  中图分类号：
- 网络首发：2023-02-03，
  
  纸质出版：2023
- 稿件说明：
移动端阅览
Jie Wan, Kangan Li, Huarui Geng, 等. Simultaneously enhancing strength and ductility of selective laser melted AlSi10Mg via introducing in-cell Al4C3 nanorods[J]. 材料研究快报（英文）, 2023,11(6):422-429.

Jie Wan, Kangan Li, Huarui Geng, et al. Simultaneously enhancing strength and ductility of selective laser melted AlSi10Mg via introducing in-cell Al4C3 nanorods[J]. Materials Research Letters, 2023, 11(6): 422-429.
Jie Wan, Kangan Li, Huarui Geng, 等. Simultaneously enhancing strength and ductility of selective laser melted AlSi10Mg via introducing in-cell Al4C3 nanorods[J]. 材料研究快报（英文）, 2023,11(6):422-429. DOI： 10.1080/21663831.2023.2173028.

Jie Wan, Kangan Li, Huarui Geng, et al. Simultaneously enhancing strength and ductility of selective laser melted AlSi10Mg via introducing in-cell Al4C3 nanorods[J]. Materials Research Letters, 2023, 11(6): 422-429. DOI： 10.1080/21663831.2023.2173028.

摘要

Abstract

BSTRACTSelective laser melted (SLMed) AlSi10Mg alloys usually fail before necking during tensile tests

which results in inadequate ductility. To overcome this problem

here we introduced Al

nanorods into the primary Al cells of SLMed AlSi10Mg via in-situ chemical reaction. Tensile tests revealed that those in-cell Al

nanorods not only increased the strain-hardening ability of SLMed AlSi10Mg but also delayed the fracture beyond necking. Consequently

15% of tensile strength increase and 78% of ductility increase were achieved simultaneously. Post-tensile TEM analysis revealed that those in-cell Al

nanorods pinned and accumulated dislocations within cells and thus alleviated stress concentration along cell boundaries.

关键词

Keywords

references

浏览量

下载量

CSCD

文章被引用时，请邮件提醒。

提交

工具集

关联资源

Compositive role of TiB2 in microstructure optimization and wear-resistant improvement of selective-laser-melted TiB2p/CrCoFeNiMn high-entropy composite

Toughening 3D-printed Zr-based bulk metallic glass via synergistic defects engineering

Ab-initio guided design of TRIP/TWIP titanium alloys for enhanced yield strength

Composition-dependent cluster-to-precipitate transformation in novel high-strength and heat-resistant Al–Zn–Mg–Cu alloys

Enhanced strength−ductility−toughness combination of H13 steels via magnetically controlled electroslag remelting

相关机构

a School of Physical Science and Technology Northwestern Polytechnical University

b State Key Laboratory of Solidification Processing Northwestern Polytechnical University

State Key Laboratory of Materials Processing and Die & Mould Technology School of Materials Science and Engineering Huazhong University of Science and Technology

a Multidisciplinary Research Center – Cardinal Stefan Wyszynski University in Warsaw

a Multidisciplinary Research Center – Cardinal Stefan Wyszynski University in Warsaw Warsaw Poland

AI问答

地址：北京市丰台区顺八条1号院2号楼北阳晨光大厦2层邮编：100079
联系电话：（010）53879206 Email：tmw@bjxintong.com.cn
技术支持由北京北大方正电子有限公司提供京ICP备09082226号-64 京公网安备11010602201714号
本系统建议在Chrome、 IE9+ 以上版本浏览器阅读本站内容，360浏览器请切换至极速模式
Cookies帮助我们提供服务并提供个性化体验。使用本网站，即表示您同意我们使用Cookies

⁰