Key role of temperature on delamination in solid-state additive manufacturing via supersonic impact

Qian Wang; Ninshu Ma; Wenjia Huang; Junmiao Shi; Xiao-Tao Luo; Sora Tomitaka; Satoshi Morooka; Makoto Watanabe

doi:10.1080/21663831.2023.2227221

Chinese

您当前的位置：

首页 >

文章列表页 >

Key role of temperature on delamination in solid-state additive manufacturing via supersonic impact

Report | 更新时间：2026-08-19

- Key role of temperature on delamination in solid-state additive manufacturing via supersonic impact
- Key role of temperature on delamination in solid-state additive manufacturing via supersonic impact
- 材料研究快报（英文） 2023年11卷第9期页码：742-748
- 作者机构：
  
  1. a Joining and Welding Research Institute Osaka University
  2. b Graduate School of Engineering Osaka University
  3. c Key Laboratory of Pressure Systems and Safety Ministry of Education East China University of Science and Technology
  4. d State Key Laboratory for Mechanical Behavior of Materials School of Materials Science and Engineering Xi'an Jiaotong University
  5. e Materials Science Research Center Japan Atomic Energy Agency
  6. f National Institute for Materials Science
- 作者简介：
- 基金信息：
- DOI：10.1080/21663831.2023.2227221
  中图分类号：
- 网络首发：2023-06-26，
  
  纸质出版：2023
- 稿件说明：
移动端阅览
Qian Wang, Ninshu Ma, Wenjia Huang, 等. Key role of temperature on delamination in solid-state additive manufacturing via supersonic impact[J]. 材料研究快报（英文）, 2023,11(9):742-748.

Qian Wang, Ninshu Ma, Wenjia Huang, et al. Key role of temperature on delamination in solid-state additive manufacturing via supersonic impact[J]. Materials Research Letters, 2023, 11(9): 742-748.
Qian Wang, Ninshu Ma, Wenjia Huang, 等. Key role of temperature on delamination in solid-state additive manufacturing via supersonic impact[J]. 材料研究快报（英文）, 2023,11(9):742-748. DOI： 10.1080/21663831.2023.2227221.

Qian Wang, Ninshu Ma, Wenjia Huang, et al. Key role of temperature on delamination in solid-state additive manufacturing via supersonic impact[J]. Materials Research Letters, 2023, 11(9): 742-748. DOI： 10.1080/21663831.2023.2227221.

摘要

Abstract

Cold spray (CS) has emerged as a representative of solid-state additive manufacturing (AM) via supersonic impact. It enables a high deposition rate of solid-state microparticles. Delamination

however

tends to occur when depositing too thick; this remains to be conquered. Here

a CS-like process

warm spray (WS)

was presented. Interestingly

it was found that the appropriate increase in particle temperature can effectively reduce the residual stress amplitude

relieving the concentrated tensile stress and safeguarding the additively manufactured components from interfacial delamination even when depositing too thick. The key role of temperature on delamination was identified in solid-state AM via supersonic impact.

关键词

Keywords

references

浏览量

下载量

CSCD

文章被引用时，请邮件提醒。

提交

工具集

关联资源

Rare-earth free MnBi magnets produced by laser powder bed fusion

Delamination induced exceptional cryogenic toughness in ferrite/martensite dual-phase layered steels

Dual effect of oxide inclusions in additively manufactured nickel superalloys

Synergistic improvement of strength and ductility in additively manufactured in-situ phase-transitioned dual-phase hetero-structures

Current-carrying friction induced interfacial degradation and delamination mechanism in AgCu10 alloy

相关机构

a Erich Schmid Institute of Materials Science Austrian Academy of Sciences

b Institute of Materials Science Joining and Forming Graz University of Technology

a Tianjin Key Laboratory of Materials Laminating Fabrication and Interfacial Controlling Technology School of Materials Science and Engineering Hebei University of Technology Tianjin People’s Republic of China

b Guangdong Provincial Key Laboratory of Metal Toughening Technology and Application Institute of New Materials Guangdong Academy of Sciences

a Tianjin Key Laboratory of Materials Laminating Fabrication and Interfacial Controlling Technology School of Materials Science and Engineering Hebei University of Technology

AI问答

地址：北京市丰台区顺八条1号院2号楼北阳晨光大厦2层邮编：100079
联系电话：（010）53879206 Email：tmw@bjxintong.com.cn
技术支持由北京北大方正电子有限公司提供京ICP备09082226号-64 京公网安备11010602201714号
本系统建议在Chrome、 IE9+ 以上版本浏览器阅读本站内容，360浏览器请切换至极速模式
Cookies帮助我们提供服务并提供个性化体验。使用本网站，即表示您同意我们使用Cookies

⁰