we investigate the influence of dislocation strengthening in the metastable parent phase on the deformation-induced martensitic transformation behavior of a face-centered cubic (fcc) Co
20
Cr
20
Fe
34
Mn
20
Ni
6
high-entropy alloy. Annealed and hot-swaged specimens were prepared. In-situ neutron diffraction experiments captured an accelerated transformation kinetics in the hot-swaged specimen due to accumulated dislocations. The phase-specific macrostress development showed that the hexagonal close-packed ε-martensite predominantly accommodated the macroscopic plastic deformation of the annealed counterpart. Conversely
the matrix dislocation strengthening promoted cooperative plasticity of the γ-matrix and the ε-martensitic phase
thus enhancing yield stress while preserving ductility.
Breaking mixture rule of strength and ductility by interface induced nano-scale heterostructure in TA1/304 composites
Enhanced strength−ductility−toughness combination of H13 steels via magnetically controlled electroslag remelting
Excellent strength-ductility balance of fully recrystallized fine-grained Mg-Y-Zn-Ni extrusion alloy with 14H-LPSO lamellas
The activation of multiple slip systems in polycrystalline zirconium by using automated lattice rotation framework
Role of microscopic degrees of freedom in mechanical response of bicrystal nanopillars
相关作者
Shijian Zheng
Lingling Zhang
Chunguang Shen
Boyang Li
Baoli He
Zhixin Wang
Kai Yao
Yuhui Li
相关机构
State Key Laboratory of High-Performance Roll Materials and Composite Forming School of Materials Science and Engineering Hebei University of Technology
c Shanghai Key Laboratory of Advanced Ferrometallurgy Shanghai University
b State Key Laboratory of Materials for Advanced Nuclear Energy Shanghai University Shanghai People’s Republic of China
a School of Materials Science and Engineering Shanghai University Shanghai People’s Republic of China
d Institute of Materials Intelligent Technology Liaoning Academy of Materials