To reduce the micro upsetting force

extend the life of the mold and improve the plasticity and the forming quality of material

the ultrasonic vibration assisted micro upsetting was studied. Modeling and simulation of ultrasonic vibration assisted micro upsetting on copper was carried out to study the effect of ultrasonic parameters on forming force and deformation

and the results showed that the ultrasonic vibration could reduce the micro upsetting force and increase the deformation

the force reduction and deformation increase had a positive linear relationship with the ultrasonic amplitude and a non-linear positive correlation with the ultrasonic frequency. Ultrasonic vibration assisted micro forming platform was built up and the micro upsetting force curves

the surface topography and size of the specimen under different ultrasonic powers were obtained. Experimental results showed that the micro upsetting force reduction increased with the increasing of ultrasonic power. The surface topography was improved with the increasing of ultrasonic power when the power was lower than 1.50 kW. But the surface topography was worse with the increasing of ultrasonic power when the power was higher than 1.50 kW. Simulation and experiment study showed that the ultrasonic vibration could effectively reduce the micro upsetting force

increase plastic deformation

reduce the drum shape and improve the surface topography and forming uniformity.