Q235B钢材的微观断裂模型损伤系数识别

邢佶慧; 郭长岚; 李彦宇; 陈爱国

doi:10.11918/j.issn.0367-6234.201507026

Chinese

您当前的位置：

首页 >

文章列表页 >

Q235B钢材的微观断裂模型损伤系数识别

更新时间：2026-10-19

- Q235B钢材的微观断裂模型损伤系数识别
- Damage coefficient identification of micromechanical fracture prediction models for steel Q235B
- 哈尔滨工业大学学报 2017年49卷第5期页码：2017-5
- 作者机构：
  
  1. 北京交通大学土木建筑工程学院,北京,100044
  2. 北京华福工程有限公司,北京,100013
  3. 中国建筑设计院有限公司,北京,100044
- 作者简介：
  
  邢佶慧 (1975—)，女，博士，副教授
- 基金信息：
  
  国家自然科学基金面上项目(6,5);教育部高等学校学科创新引智计划项目(B13002)
- DOI：10.11918/j.issn.0367-6234.201507026
  中图分类号： TU392.3
- 纸质出版：2017
- 稿件说明：
移动端阅览
邢佶慧, 郭长岚, 李彦宇, 等. Q235B钢材的微观断裂模型损伤系数识别[J]. 哈尔滨工业大学学报, 2017,49(5):2017-5.

XING Jihui, GUO Changlan, LI Yanyu, et al. Damage coefficient identification of micromechanical fracture prediction models for steel Q235B[J]. 2017, 49(5): 2017-5.
邢佶慧, 郭长岚, 李彦宇, 等. Q235B钢材的微观断裂模型损伤系数识别[J]. 哈尔滨工业大学学报, 2017,49(5):2017-5. DOI： 10.11918/j.issn.0367-6234.201507026.

XING Jihui, GUO Changlan, LI Yanyu, et al. Damage coefficient identification of micromechanical fracture prediction models for steel Q235B[J]. 2017, 49(5): 2017-5. DOI： 10.11918/j.issn.0367-6234.201507026.

摘要

为获取广泛应用的Q235B钢材的循环空穴增长 (CVGM) 和退化有效塑性应变 (DSPS) 微观断裂模型损伤系数，取材自热轧无缝钢管与冷弯高频焊管母材、热影响区和焊缝区，分别加工12个光滑和8个缺口试件进行低周往复加载材性试验，获取4种材料混合强化参数，利用Fortran语言编译了CVGM模型及DSPS模型程序代码，作为UVARM子程序嵌入ABAQUS中，识别了其CVGM和DSPS损伤退化系数，用于缺口圆棒试件实验过程模拟，取得较好预测效果.

Abstract

In order to obtain the damage coefficient of Cyclic Void Growth Model (CVGM) and Degraded Significant Plastic Strain (DSPS) model for Steel Q235B widely used in China

taking four types of steel Q235B materials extracted from the hot-rolled seamless pipe and the matrix

heat affected zone as well as welded zone of cold-welding pipe respectively

twelve smooth specimens and eight notched specimens were machined. A series of low-frequency cyclic loading material tests were carried out to acquire the combined hardening parameters. The UVARM subroutines of CVGM model and DSPS model were developed in FORTRAN language and embedded in ABAQUS. The calibration of the damage degradation coefficients of CVGM model and DSPS model of four kinds of steel materials was performed. Based on the UVARM subroutine and identified damage coefficients

fracture initiation for the notched specimens can be predicted and simulation results match well with experimental results.

关键词

Keywords

references

浏览量

594

下载量

CSCD

文章被引用时，请邮件提醒。

提交

工具集

关联资源

改进的组合式L形钢管混凝土柱力学性能试验

低温风洞绝热系统的研究现状及其关键技术

BCCP内水压承载能力原型试验

高强方钢管轻骨料混凝土桁架加劲T型节点试验

考虑代价敏感性的增量式入侵检测机制