To obtain the outlet temperature of combustor

a kind of high-temperature and water cooling thermocouple was designed. The main factors affecting the results of thermocouple measurement were analyzed after numerical simulation. Results showed that the high-temperature water cooling thermocouple can achieve high temperature measurement under the condition of 2400K. With the increase of the distance between the water cooling structure and the stagnation cover

the temperature measurement result was more accurate

and the increase in the area ratio of the inlet and outlet of the stagnation cover within a reasonable range can make the measurement results more accurate. The surface emissivity of the measuring point had a great influence on the radiation error. The pressure and flow rate of cooling water can be effectively reduced after adding zirconia coating onto the surface of the rake body.