基于流固热耦合的非金属迷宫密封泄漏特性与公式构造

周敏; 孙丹; 赵欢; 智强; 张国臣

doi:10.13224/j.cnki.jasp.20200467

Chinese

您当前的位置：

首页 >

文章列表页 >

基于流固热耦合的非金属迷宫密封泄漏特性与公式构造

叶轮机械 | 更新时间：2025-04-07

- 基于流固热耦合的非金属迷宫密封泄漏特性与公式构造
- Leakage characteristics and formula establishment of nonmetallic labyrinth seal based on fluid⁃solid⁃thermal coupling
- 航空动力学报 2021年36卷第8期页码：1783-1792
- 作者机构：
  
  1.沈阳航空航天大学航空发动机学院辽宁省航空推进系统先进测试技术重点实验室，沈阳 110136
  2.沈阳鼓风机集团股份有限公司辽宁重大装备制造协同创新中心，沈阳 110142
- 作者简介：
  
  周敏（1996-），女，硕士生，主要从事非金属密封多物理场耦合性能研究。
  孙丹（1981-），男，教授，博士，主要从事透平机械先进密封技术研究。E⁃mail：phd_sundan@163.com
- 基金信息：
  
  国家自然科学基金(52075346;51675351);辽宁省自然科学基金(2019⁃ZD⁃0236);辽宁省教育厅基础研究项目(JYT2020047)
- DOI：10.13224/j.cnki.jasp.20200467
  中图分类号：
- 稿件说明：
移动端阅览
周敏, 孙丹, 赵欢, 等. 基于流固热耦合的非金属迷宫密封泄漏特性与公式构造[J]. 航空动力学报, 2021,36(8):1783-1792.

Min ZHOU, Dan SUN, Huan ZHAO, et al. Leakage characteristics and formula establishment of nonmetallic labyrinth seal based on fluid⁃solid⁃thermal coupling[J]. Journal of Aerospace Power, 2021, 36(8): 1783-1792.
周敏, 孙丹, 赵欢, 等. 基于流固热耦合的非金属迷宫密封泄漏特性与公式构造[J]. 航空动力学报, 2021,36(8):1783-1792. DOI： 10.13224/j.cnki.jasp.20200467.

Min ZHOU, Dan SUN, Huan ZHAO, et al. Leakage characteristics and formula establishment of nonmetallic labyrinth seal based on fluid⁃solid⁃thermal coupling[J]. Journal of Aerospace Power, 2021, 36(8): 1783-1792. DOI： 10.13224/j.cnki.jasp.20200467.

摘要

建立了考虑齿变形的非金属迷宫密封泄漏特性流固热耦合数值求解模型，在验证求解模型准确性的基础上，研究了聚醚醚酮（PEEK）、填充30%碳纤维增强聚醚醚酮（PEEK⁃CA30）和铝合金三种材料迷宫密封在不同压比、温度下的流场特性、结构力学特性与泄漏特性，并基于Vermes公式构造了考虑齿变形的非金属迷宫密封泄漏量理论公式。研究结果表明：建立的迷宫密封流固热耦合模型可以准确计算非金属密封齿的变形量和变形后的泄漏量。在研究的三种材料中，采用PEEK⁃CA30材料密封齿的变形量相对较小，占密封齿径向长度的0.35%~0.67%，其密封性能较好，相比于未考虑齿变形密封的泄漏量增加1.2%~6.8%。当温度高于500 K，压比大于3时，采用铝合金材料密封齿的最大等效应力达到材料的屈服极限而引起密封件失效。所构造的泄漏量理论公式能够准确预测考虑齿变形的非金属迷宫密封泄漏量，为非金属迷宫密封泄漏特性分析提供理论依据。

Abstract

Fluid⁃solid⁃thermal coupling numerical model of nonmetallic labyrinth seal leakage characteristics was established considering the deformation of tooth.The flow field

structure mechanical characteristics and leakage characteristics of polyether ether ketone (PEEK)

30% carbon fiber⁃filled reinforced polyether ether ketone (PEEK⁃CA30) and aluminium alloy in three kinds of material labyrinth seal under different pressure ratios and temperature were studied on the basis of the validation to solve the model accuracy

and based on the formula for Vermes

the nonmetallic labyrinth leakage theory formula was constructed considering the deformation of tooth.The results showed that the fluid⁃solid⁃thermal coupling model of labyrinth seal can accurately calculate the deformation of nonmetallic seal teeth and the leakage rate.Among the three materials studied

PEEK⁃CA30 material had relatively small deformation of sealing teeth

accounting for 0.35%-0.67% of radial length of sealing teeth.Its sealing performance was good

and compared with the leakage rate without considering deformation of teeth

it only increased by 1.2%-6.8%.When the pressure ratio was more than 3 and the temperature was higher than 500 K

the equivalent stress of the seal teeth using aluminium alloy material reached the yield limit of the material

leading to the failure of the seal.The theoretical formula of leakage rate can accurately predict the leakage rate of nonmetallic labyrinth seal considering deformation of tooth

providing a theoretical basis for analysis of the leakage characteristics of nonmetallic labyrinth seal.

关键词

Keywords

references

陈璐琪 , 张万福 , 顾乾磊 , 等 . 光滑环形密封阻塞流动特性研究 [J]. 中国电机工程学报 , 2018 , 38 ( 22 ): 6632 ⁃ 6640 .

CHEN Luqi , ZHANG Wanfu , GU Qianlei , et al . Research on the flow characteristics of smooth annular seal under choked flow conditions [J]. Proceedings of the CSEE , 2018 , 38 ( 22 ): 6632 ⁃ 6640 . (in Chinese)

李钰洁 , 刘永葆 , 贺星 . 间隙变化对新型涡轮密封气动性能影响的数值分析 [J]. 推进技术 , 2015 , 36 ( 8 ): 1179 ⁃ 1185 .

LI Yujie , LIU Yongbao , HE Xing . Numerical simulation for effects of clearance change of a novel seal on aerodynamic performance of gas turbine [J]. Journal of Propulsion Technology , 2015 , 36 ( 8 ): 1179 ⁃ 1185 . (in Chinese)

张鹏 , 朱强 , 秦鹤勇 , 等 . 航空发动机用耐高温材料的研究进展 [J]. 材料导报 , 2014 , 28 ( 11 ): 27 ⁃ 31,37 .

ZHANG Peng , ZHU Qiang , QIN Heyong , et al . Research progress of high temperature materials for aero⁃engines [J]. Materials Reports , 2014 , 28 ( 11 ): 27 ⁃ 31,37 . (in Chinese)

JOHN K W , EDUARDO A , LESTER P . Thermoplastic labyrinth seal for centrifugal compressors [C]∥ Proceedings of 33rd Turbomachinery Symposium . College Station,TX，US ： Texas A&M University，Turbomachinery Laboratories , 2004 .

XU J , AMBROSIA M S , RHODE D L . Effect of tooth bending damage on the leakage of straight⁃through labyrinth seal [C]∥ Proceedings of ASME Fluids Engineering Division Summer Meeting . Houston,TX,USA : ASME , 2005 : 119 ⁃ 124 .

XU J . Effects of operating damage of labyrinth seal on seal leakage and wheelspace hot gas ingress [D]. College Station , Texas , USA:Texas A&M University , 2006 .

陈尧兴 , 李志刚 , 晏鑫 , 等 . 迷宫齿弯曲磨损时密封泄漏特性和转子动力特性系数研究 [J]. 西安交通大学学报 , 2018 , 52 ( 6 ): 157 ⁃ 164 .

CHEN Yaoxing , LI Zhigang , YAN Xin , et al . Investigations on the leakage characteristics and rotordynamic coefficients of labyrinth seal with tooth bending damage [J]. Journal of Xi'an Jiaotong University , 2018 , 52 ( 6 ): 157 ⁃ 164 . (in Chinese)

陈尧兴 , 李志刚 , 晏鑫 , 等 . 迷宫齿蘑菇形磨损时密封泄漏特性和转子动力特性系数研究 [J]. 西安交通大学学报 , 2018 , 52 ( 1 ): 40 ⁃ 46 .

CHEN Yaoxing , LI Zhigang , YAN Xin , et al . Investigation on the leakage performance and rotordynamic coefficients of labyrinth seal with mushroom⁃shaped tooth wear [J]. Journal of Xi'an Jiaotong University , 2018 , 52 ( 1 ): 40 ⁃ 46 . (in Chinese)

孙丹 , 卢江 , 王雯 , 等 . 基于热力学效应的迷宫密封封严机理数值研究 [J]. 热力透平 , 2018 , 47 ( 3 ): 175 ⁃ 181 .

SUN Dan , LU Jiang , WANG Wen , et al . Numerical investigations for sealing mechanism of labyrinth seals based on thermodynamic effect [J]. Thermal Turbine , 2018 , 47 ( 3 ): 175 ⁃ 181 . (in Chinese)

汤赫男 , 鲁洁 , 王世杰 . 齿形角对迷宫密封性能影响的流固耦合分析 [J]. 润滑与密封 , 2015 , 40 ( 10 ): 36 ⁃ 40 .

TANG Henan , LU Jie , WANG Shijie . Fluid⁃structure interaction analysis of tooth profile angle effect on labyrinth seal performance [J]. Lubrication Engineering , 2015 , 40 ( 10 ): 36 ⁃ 40 . (in Chinese)

汤赫男 , 鲁杰 , 王世杰 . 往复式压缩机迷宫密封中空腔深度对泄漏量的影响分析 [J]. 机械设计与制造 , 2017 ( 3 ): 122 ⁃ 124 .

TANG Henan , LU Jie , WANG Shijie . Analysis of the influence of cavity depth on the labyrinth seal leakage of reciprocating compressors [J]. Machinery Design and Manufacture , 2017 ( 3 ): 122 ⁃ 124 . (in Chinese)

吴文健 , 应光耀 , 魏晨 , 等 . 气流激振与转子系统的流固耦合计算 [J]. 浙江电力 , 2017 , 36 ( 1 ): 43 ⁃ 46 .

WU Wenjian , YING Guangyao , WEI Chen , et al . Fluid⁃structure interaction computation of airstream excitation and rotor system [J]. Zhejiang Electric Power , 2017 , 36 ( 1 ): 43 ⁃ 46 . (in Chinese)

张雨 , 张开林 . 结构变形对高速齿轮箱直通式迷宫密封性能的影响分析 [J]. 液压与气动 , 2019 ( 3 ): 14 ⁃ 18 .

ZHANG Yu , ZHANG Kailin . Influence of structural deformation on sealing performance of high⁃speed gearbox with straight⁃through labyrinth seal [J]. Chinese Hydraulics and Pneumatics , 2019 ( 3 ): 14 ⁃ 18 . (in Chinese)

MARTIN S . Exploring the grants labyrinth [J]. Estates Gazette , 2002 ( 246 ): 131 ⁃ 131 .

EGLI A . The leakage of gases through narrow channels [J]. Journal of Applied Mechanics , 1937 , 4 ( 2 ): 63 ⁃ 68 .

VERMES G . A fluid mechanics approach to the labyrinthseal leakage problem [J]. Journal of Engineering for Power , 1961 , 83 ( 2 ): 161 ⁃ 169 .

胡东旭 , 贾力 , 杨立新 . 篦齿封严泄漏特性的实验 [J]. 航空动力学报 , 2014 , 29 ( 3 ): 549 ⁃ 555 .

HU Dongxu , JIA Li , YANG Lixin . Experiment on leakage characteristics in labyrinth seal [J]. Journal of Aerospace Power , 2014 , 29 ( 3 ): 549 ⁃ 555 . (in Chinese)

孙丹 , 邹静岚 , 赵欢 , 等 . 实际气体参数对迷宫密封静力与动力特性影响机理研究 [J]. 动力工程学报 , 2020 , 40 ( 1 ): 14 ⁃ 22,30 .

SUN Dan , ZOU Jingluan , ZHAO Huan , et al . Influence mechanism of real gas parameters on static and dynamic characteristics of labyrinth seals [J]. Journal of Chinese Society of Power Engineering , 2020 , 40 ( 1 ): 14 ⁃ 22,30 . (in Chinese)

王福军 . 计算流体动力学分析⁃CFD软件的原理与应用 [M]. 北京：清华大学出版社， 2004 : 10 ⁃ 11 .

张小伟 , 王延荣 , 张潇 , 等 . 涡轮机械叶片的流固耦合数值计算方法 [J]. 航空动力学报 , 2009 , 24 ( 7 ): 1622 ⁃ 1626 .

ZHANG Xiaowei , WANG Yanrong , ZHANG Xiao , et al . Numerical method for fluid⁃structure interaction in turbomachinery bladings [J]. Journal of Aerospace Power , 2009 , 24 ( 7 ): 1622 ⁃ 1626 . (in Chinese)

魏炫宇 , 马咏梅 , 丁万 , 等 . 机械密封摩擦副界面热流固耦合分析 [J]. 机械设计与制造工程 , 2017 , 46 ( 6 ): 89 ⁃ 94 .

WEI Xuanyu ， MA Yongmei ， DING Wan , et al . The thermal fluid and solid coupling analysis on the friction surface of mechanical seal [J]. Machine Design and Manufacturing Engineering , 2017 , 46 ( 6 ): 89 ⁃ 94 . (in Chinese)

马灵童 , 孟庆睿 . 液黏传动摩擦副流固耦合传热分析 [J]. 润滑与密封 , 2019 , 44 ( 10 ): 98 ⁃ 103 .

MA Lingtong , MENG Qingrui . Analysis of fluid⁃solid coupled heat transfer of friction pairs on hydro⁃viscous drive [J]. Lubrication Engineering , 2019 , 44 ( 10 ): 98 ⁃ 103 . (in Chinese)

TOSHIO H , GUO Zenglin , KIRK R G . Application of computation fluid dynamicanalysis for rotating machinery:Part Ⅱ labyrinth seal analysis [J]. Journal of Engineering for Gas Turbines and Power , 2005 , 127 ( 4 ): 820 ⁃ 826 .

饶先花 , 曹民 , 代惊奇 , 等 . 国内外特种工程塑料聚芳醚酮的生产、应用及发展前景 [J]. 塑料工业 , 2012 , 40 ( 9 ): 18 ⁃ 22 .

RAO Xianhua , CAO Min , DAI Jingqi , et al . Production,application and development prospects of special engineering plastic polyaryletherketone at home and abroad [J]. China Plastics Industry , 2012 , 40 ( 9 ): 18 ⁃ 22 . (in Chinese)

浏览量

下载量

CSCD

文章被引用时，请邮件提醒。

提交

工具集

关联资源

浮环密封泄漏特性数值计算与试验

密封-转子系统气流激振问题数值仿真

动叶顶部蜂窝面迷宫密封对涡轮级气动性能的影响

迷宫通道内部流动和泄漏特性的数值分析

基于三维接触摩擦单元的套齿连接解析建模研究