考虑二次射流速度分布的偏转板电液伺服阀前置级压力特性研究

程文豪; 葛声宏; 杨瀚浩; 林文; 朱玉川

doi:10.13433/j.cnki.1003-8728.20230180

Chinese

您当前的位置：

首页 >

文章列表页 >

考虑二次射流速度分布的偏转板电液伺服阀前置级压力特性研究

更新时间：2026-04-23

- 考虑二次射流速度分布的偏转板电液伺服阀前置级压力特性研究
- Study on Pre-stage Pressure Characteristics of Deflector Electro-hydraulic Servo Valve Considering Velocity Distribution of Secondary Jet
- 机械科学与技术 2025年44卷第4期页码：724-729
- 作者机构：
  
  1. 南京航空航天大学机电学院,南京,210016
  2. 中航工业南京伺服控制系统有限公司,南京,210032
- 作者简介：
  
  [ "程文豪, 硕士研究生," ]
  [ "朱玉川, 教授, 博士生导师," ]
- 基金信息：
  
  国家自然科学基金项目 51975275 江苏省重点研发计划 BE2021034 南京航空航天大学研究生科研与实践创新项目 xcxjh20210502
- DOI：10.13433/j.cnki.1003-8728.20230180
  中图分类号：
- 纸质出版：2025
- 稿件说明：
移动端阅览
程文豪, 葛声宏, 杨瀚浩, 等. 考虑二次射流速度分布的偏转板电液伺服阀前置级压力特性研究[J]. 机械科学与技术, 2025,44(4):724-729.

程文豪, 葛声宏, 杨瀚浩, et al. Study on Pre-stage Pressure Characteristics of Deflector Electro-hydraulic Servo Valve Considering Velocity Distribution of Secondary Jet[J]. Mechanical Science and Technology for Aerospace Engineering, 2025, 44(4): 724-729.
程文豪, 葛声宏, 杨瀚浩, 等. 考虑二次射流速度分布的偏转板电液伺服阀前置级压力特性研究[J]. 机械科学与技术, 2025,44(4):724-729. DOI： 10.13433/j.cnki.1003-8728.20230180.

程文豪, 葛声宏, 杨瀚浩, et al. Study on Pre-stage Pressure Characteristics of Deflector Electro-hydraulic Servo Valve Considering Velocity Distribution of Secondary Jet[J]. Mechanical Science and Technology for Aerospace Engineering, 2025, 44(4): 724-729. DOI： 10.13433/j.cnki.1003-8728.20230180.

摘要

针对偏转板电液伺服阀前置级传统数学建模认为二次射流出口速度服从均匀分布的不足，提出二次射流出口速度满足高斯分布。基于平面自由紊动射流理论与液体活塞模型，建立了偏转板电液伺服阀前置级压力特性数学模型。通过有限元仿真和断载压力特性试验表明：相较于传统模型，偏转板位移越大，该模型求解精度越高; 当偏转板位移0.05 mm，求解精度相较传统模型提高了约17%，为偏转板电液伺服阀精确建模与性能分析奠定了基础。

Abstract

Aiming at the shortcomings of traditional mathematical modeling of the pre-stage of the deflector electro-hydraulic servo valve that the outlet velocity on the secondary jet stage obeyed the uniform distribution

the outlet velocity of the secondary jet was proposed to meet the Gaussian distribution. Based on the theory of plane free turbulent jet and liquid piston model

the mathematical model describing the pre-stage pressure characteristics of deflector electro-hydraulic servo valve is established. The simulation and the pressure characteristic test show that compared with the traditional model

the larger the deflector displacement

the more accurate the proposed model. When the deflector plate displacement is 0.05 mm

the accuracy of the proposed model is improved by about 17% compared with the traditional model

which lays a foundation for the accurate modeling and performance analysis of the deflector electro-hydraulic servo valve.

关键词

Keywords

references

浏览量

下载量

CSCD

文章被引用时，请邮件提醒。

提交

工具集

关联资源

射流管伺服阀前置级数学建模与流场仿真