中国移动通信集团广东有限公司
纸质出版:2020
移动端阅览
[1]苏林奋.5G专线业务低时延特性的研究与实现[J].电信工程技术与标准化,2020,33(07):16-19.
苏林奋. Research and implementation of 5G line service with low delay[J]. 2020, 33(7): 16-19.
[1]苏林奋.5G专线业务低时延特性的研究与实现[J].电信工程技术与标准化,2020,33(07):16-19. DOI: 10.13992/j.cnki.tetas.2020.07.004.
苏林奋. Research and implementation of 5G line service with low delay[J]. 2020, 33(7): 16-19. DOI: 10.13992/j.cnki.tetas.2020.07.004.
随着移动通信的发展
专线业务的时延要求越来越低。本文以5G专线业务低时延特性的实现为目标
详细分析了网络架构和切片对时延的影响
提出了相应的低时延特性的实现方案。为降低线路时延
将网络重构为CU-DU-AAU
CU放置位置下沉。为保证设备转发低时延
采用Flex E的1.5层快速转发。为避免带宽抢占造成的分组丢失
减少业务拥塞
提出信道硬隔离的方案
可实现5G专线业务低时延的特性。
With the development of mobile communication
the delay requirement of line service is lower and lower. In this paper
aiming at the realization of low delay characteristics of 5 G line service
the infl uence of network architecture and slicing on delay is analyzed in detail
and the corresponding realization scheme of low delay characteristics is proposed. In order to reduce the line delay
the network is reconstructed as CU-DU-AAU
and the placement of CU sinks. Device forwarding delay can be reduced through the fast forwarding of Flex Ethernet. Through hard channel isolation
packet loss caused by bandwidth preemption can be avoided
traffi c congestion can be reduced
and low delay characteristics of 5 G line service can be realized.
基于FlexE的承载网络分片隔离技术研究和应用 [J]. 欧阳春波,李春荣,胡永健,王林. 电信技术 . 2018(12)
0
浏览量
43
下载量
1
CSCD
关联资源
相关文章
相关作者
相关机构