A high precision CMOS bandgap voltage reference source fabricated in TSMC 40 nm CMOS is presented in this paper. Error source of bandgap and the way to eliminate it are analyzed. By using chopper technology and notch filter
not only offset voltage is removed but also ripple wave caused by chopper technology is lessened. Based on simulation
compared to bandgap without chopper technology
3σ inaccuracy of the bandgap with chopper technology increased by 7.7 times with a maximum 3σ inaccuracy of 0.54% and a temperature coefficient of 14×10/℃.
关键词
Keywords
references
Guang Ge, Cheng Zhang, Gian Hoogzaad, et al. A single-trim CMOSbandgap reference with a 3σ inaccuracy of 0.15% from -40℃ to 125℃[J]. IEEE Journal Solid-State Circuits, 2011, 46(11): 2693-2701. DOI: 2693
Brito J P M, Klimach H, Bampi S. A design methodology for matching improvement in bandgap references[C]//Quality Electronic Design, 2007. ISQED 07. 8th International Symposium on. San Jose, CA, 2007: 586-594.
Vasilica A G, Pristavu G, Pasoi C, et al. Offset cancellation in bandgap references with CMOS operational amplifiers[C]//Semiconductor Conference (CAS), 2011 International. Sinaia: IEEE, 2011: 421-424.
Ling Du, Ning Ning, Wu Kejun, et al. A process variation insensitive bandgap reference with self-calibration technique[C]//ASIC (ASICON), 2013 IEEE 10th International Conference on. Shenzhen: IEEE, 2013: 1-4.
Perry R T, Lewis S H, Brokaw A P, et al. A 1.4V supply CMOS fractional bandgap reference[J]. IEEE Journal Solid-State Circuits, 2007, 42(10): 2180-2186, . DOI: 2180
Enz C C, Temes G C, . Circuit techniques for reducing the effects of op-amp imperfections: autozeroing, correlated double sampling, and chopper stabilization[J]. In Proceedings of the IEEE, 1996, 84(11): 1584-1614. DOI: 1584